Évaluations - 1, GPA: 4
(
)
)
|
Facilité d'utilisation
You have chosen wisely when you picked model EM-120 as your mixer. Years of dependable service await you. You may already have a good general understanding of mixers. We recommend careful reading of this OWNER’S MANUAL before connecting your mixer to take the best advantage of your mixer’s capabilities. You will learn how to connect the mixer properly and how to really get the most out of all the features Yamaha has incorporated into this mixer. If you need any special help or service, see your Yamaha dealer. He knows what to do and will be happy to help you. You’ve made a good choice. We are confident you’ll be satisfied with the performance and versatility of EM-120. FEATURES The EM-1 20 is a six input, stereo output mixer with a built-in 100 Watt power amplifier that has the quality, performance, versatility and roadability needed for today’s musical situations. Check the features here and study the explanations of the panels. You’ll see immediately that the EM-120 has everything but the creativity of the musician or soundman. Superior Electrical Performance This mixer makes full use of Yamaha’s advanced electronics technology and nine decades of experience as a manufacturer of musical instruments. It is compact and functional in design, with many full performance features that make it ideal for recording, sub-mixing or for use as part of a PA system or instrument mixer system. Total of 10 Inputs 6 INPUT channels, 1 PHONO stereo input (L & R) and 3 auxiliary monaural inputs. All 6 INPUT channels have their own individual VOLUME, LOW/HIGH-EQ and REVERB/ECHO controls, and INPUT LEVEL and OUTPUT selector switches. All inputs (except PHONO) are standard phone jacks. Built-in Reverb Unit Without the addition of a separate unit, this built-in Accutronics spring-type reverberation unit gives you the freedom for some very special effects for each channel. But there are also provisions for connection of external echo delay or other devices. Big Power Output The EM-120 is a self-powered mixer that can deliver 100 Watts (2x50W) into any 8-ohm speaker system that is designed to handle this amount of input. Plenty of power for clubs and small stages. Easy-to-read VU meters The two precision VU meters provide a visual indication of average power output level and give you greater control over the sound you want to create. Both meters are illuminated for easier reading. Better Monitoring The headphones jack accepts almost any ster-eo headphones and assures accurate monitoring even in the loudest environment. The sound you hear is the same as that which feeds the speaker output but at a lower level. Rugged, Roadable Package The EM-120 is rugged but lightweight. It’s built to take normal rough handling met during work on the road. The black leatherette finish and reinforced corners resist scratches and enhance the appearance. PRECAUTIONS & CONNECTIONS Precautions The EM-120 is rugged and durable, but not indestructible. It has been designed to stand up to tough handling but certain precautions must be taken. The most frequent cause of trouble is improper use due to incomplete understanding of exactly what the mixer can and cannot do. You can easily avoid these mistakes by following the precautions listed here before plugging in or attempting to operate your mixer. Be sure the POWER switch is off before plugging in the power cord. Unplug the POWER cord, or at least make sure the POWER switch is off before connecting or disconnecting any cords. If a fuse blows, be sure that the replacement is exactly the same type and rating. If you have regular fuse failures, consult your Yamaha dealer. Do not expose the mixer to direct sunlight and other sources of excessive heat, humidity, dust or shock. Connecting Up 1. Before plugging in the power cord, make sure the VOLTAGE SELECTOR on the rear panel is properly set for your locality. (U.S., Canadian and Australian models are preset and thus don’t have this feature.) For the British Standard model, please refer to the instructions on page 6. 2. Set the front panel VOLUME controls to “zero” and make sure the POWER switch is OFF. 3. Connect your speaker, etc. to the output jacks. 4. Connect the input cords from your instruments and/or mics to the INPUT, AUX IN, and FROM ECHO jacks. 5. Plug in the power cord. 6. Push on the POWER switch. 7. Adjust the VOLUME and other controls. Now you are ready to mix sound sources as you like. FRONT PANEL © O- © 0 INPUT LEVEL OUTPUT ’ti # ¡air tn1 Ô é ty IQJ Ô # CD1 Ô Ó # HZ» LQJ ô ft Ô: # Çjj,” 1¿¡qÍ 0 * :Ô: # ¡a¡r OJ Ô ®YAMAHA MODEL EM-120 -