Évaluations - 2, GPA: 4
(
)
)
|
Par ce dispositif a également d'autres instructions :
Facilité d'utilisation
HIGH 10kHz (Shelving) MID (MONO) 250Hz-5kHz (Peaking) MID (ST) 2.5kHz (Peaking) LOW 100Hz (Shelving) Compressor (COMP) CH1-8 On each channel 1-8: One control adjusts the Gain, Threshold, and Ratio simultaneously. PEAK Indicator On each channel: Indicator lights if post-EQ signal comes within 3dB of the clipping level. SIGNAL Indicator On each channel: Indicator lights if post-EQ signal reaches –10dB. STANDBY Switch CH1-8 mute Level Meter ST, PFL/AFL Two 12-points LED level meter (PEAK, +5, +3, +1, 0, –1, –3, –5, –7, –10, –15, –20 dB) PEAK lights if the signal comes within 3 dB of the clipping level. Digital Graphic Equalizer ST OUT 9-band (63, 125, 250, 500, 1k, 2k, 4k, 8k, 16kHz), ±12 dB (maximum variation) Preset . 3, User preset . 3 Frequency Response Correction (FRC) System Pink noise/Music playback measurement mode Feedback Suppressor (FBS) AUTO/MANUAL mode MAXIMIZE 3-band compressor on/off Digital Effect 2 effect processors, 16 programs each, PARAMETER control each Foot switches (effects on/off) Lamp XLR-3-31 type, 12 V DC between pins 2 and 3, 5 W max. Maximum Output Power Select Switch 500W+500W, 200W+200W, 75W+75W Power Amplifier Signal Select Switch L/R, AUX1/MONO, AUX1/AUX2 Yamaha Speaker Processing SPEAKERS Speaker EQ on/off Power Amplifier Protection POWER switch on/off mute DC-fault: power supply shutdown/manual reset Thermal/heatsink temp 90°C: output mute/auto reset Vl limiter/RL 2. Clip limiter/THD 1%: compression, Indicator . 2 Power Supply Protection Thermal/heatsink temp 100°C: power supply shutdown/manual reset Cooling Dual variable-speed fan Power Consumption 500 W AC Cord Length 2500 mm Dimensions Height 155 mmDepth 493 Width 444 Net Weight 11 kg <= >= <= >= >= EMX5016CF Owner’s Manual 35 Specifications Reference Specifications Reference Input Characteristics Input Terminals PAD GAIN Actual Load Impedance For Use With Nominal Input level Connector Sensitivity *2 Nominal Max. before clip CH INPUT A 1-8 0 dB –60 dB 3 k. 50-600 . Mics –80 dBu (0.078 mV) –60 dBu (0.775 mV) –40 dBu (7.75 mV) XLR-3-31 type *3 –16 dB –36 dBu (12.3 mV) –16 dBu (123 mV) +4 dBu (1.23 V) 26 dB –34 dB –54 dBu (1.55 mV) –34 dBu (15.5 mV) –14 dBu (155 mV) +10 dB –10 dBu (245 mV) +10 dBu (2.45 V) +30 dBu (24.5 V) CH INPUT B 1-8 0 dB –60 dB 10 k. 600 . Lines –80 dBu (0.078 mV) –60 dBu (0.775 mV) –40 dBu (7.75 V) Phone jack *4 –16 dB –36 dBu (12.3 mV) –16 dBu (123 mV) +4 dBu (1.23 V) 26 dB –34 dB –54 dBu (1.55 mV) –34 dBu (15.5 mV) –14 dBu (155 mV) +10 dB –10 dBu (245 mV) +10 dBu (2.45 V) +30 dBu (24.5 V) ST CH MIC INPUT 9/10-15/16 — –60 dB 3 k. 50-600 . Mics –80 dBu (0.078 mV) –60 dBu (0.775 mV) –40 dBu (7.75 mV) XLR-3-31 type *3 –16 dB –36 dBu (12.3 mV) –16 dBu (123 mV) –10 dBu (245 mV) ST CH LINE INPUT 9/10-15/16 — –34 dB 10 k. 600 . Lines –54 dBu (1.55 mV) –34 dBu (15.5 mV) –14 dBu (155 mV) Phone jack *5 RCA Pin jack *5 +10 dB –10 dBu (245 mV) +10 dBu (2.45 V) +30 dBu (24.5 V) CH INSERT IN 1-8 — — 10 k. 600 . Lines –20 dBu (77.5 mV) 0 dBu (0.775 V) +20 dBu (7.75 V) Phone jack *5 *1 0dBu is referenced to 0.775Vrms. *2 Sensitivity is the lowest level that will produce an output of +4dBu (1.23V), or the nominal output level when the unit is set to maximum level. (All faders and level controls are at maximum position.) *3 XLR-3-31 type connectors are balanced. *4 Phone jacks are balanced. (T=HOT, R=COLD, S=GND) *5 Phone jacks and RCA pin jacks are unbalanced. Output Characteristics Output Terminals Actual Source Impedance For Use With Nominal Output level Connector Nominal Max. before clip ST OUT [L, R] 150 . 600 . Lines +4 dBu (1.23 V) +20 dBu (7.75 V) Phone jack *2 ST SUB OUT [L, R] 150 . 600 . Lines +4 dBu (1.23 V) +20 dBu (7.75 V) Phone jack *2 AUX SEND 1, 2 150 . 600 . Lines +4 dBu (1.23 V) +20 dBu (7.75 V) Phone jack *2 EFF SEND 1, 2 150 . 600 . Lines +4 dBu (1.23 V) +20 dBu (7.75 V) Phone jack *2 CH INSERT OUT 1-8 600 . 10 k. Lines 0 dBu (0.775 V) +20 dBu (7.75 V) Phone jack *2 REC OUT [L, R] 600 . 10 k. Lines –10 dBV (316 mV) +10 dBV (3.16 V) RCA pin jack PHONES [L, R] 100 . 40 . Lines 3 mW 75 mW Phone jack (TRS) SPEAKERS 0.1 . 4 . Speakers 125 W 500 W SPEAKON Phone jack *2 *1 0dBu is referenced to 0.775Vrms. 0dBV is referenced to 1Vrms. *2 Phone jacks are unbalanced. 36 EMX5016CF Owner’s Manual Specifications Reference Specifications Reference Digital Effect Program List EFFECT 1 No. Program Parameter Range Descriptions 1 HALL 1 Reverb Time 0.3 to 10.0 s Reverb simulating a large space such as a concert hall. 2 ROOM 1 Reverb Time 0.3 to 3.2 s Reverb simulating the acoustics of a small space (room). 3 PLATE 1 Reverb Time 0.3 to 10.0 s Simulation of a metal-plate reverb unit, producing a more hard-edged reverberation. 4 LARGE STAGE 1 Reverb Time 0.3 to 10.0 s Reverb simulating a large stage. 5 SMALL STAGE 1 Reverb Time 0.3 to 10.0 s Reverb simulating a small stage. 6 VOCAL ECHO Delay 30.0 to 743.0 ms Echo designed for conventional vocals. 7 KARAOKE Delay 40.0 to 265.0 ms Echo designed for karaoke (sing-along)...