Évaluations - 2, GPA: 3.5
(
)
)
|
Par ce dispositif a également d'autres instructions :
Facilité d'utilisation
1. Select the first tone you want to use. Press bn (TONE) and then use br (10-key) to select the tone you want. Example: 032 ELEC.PIANO 1 E.P i ano1 2. Press cp. Lights 3. Use br (10-key) to select the second tone you want. Example: 205 STRINGS Str in gs 4. Play something on the keyboard. Both tones sound at the same time. 5. Pressing cp again to unlayer the keyboard (so it plays only the tone you selected in step 1). • Each press of cp toggles between layered (two tones) and unlayered (one tone). You can use the procedure below to assign different tones to the right range and left range of the keyboard, so it sounds like you are playing an ensemble between two instruments. To select the two tones for a split keyboard 1. Select the tone for the right side range (page E-14). Press bn (TONE) and then use br (10-key) to select the tone you want. Example: 303 FLUTE 1 Flute 1 2. Press co. Lights 3. Use br (10-key) to select the left side range tone you want. Example: 064 VIBRAPHONE 1 Vibes 1 4. Play something on the keyboard. This will sound the tones assigned to the left and right side ranges of the keyboard. VIBRAPHONE 1 FLUTE 1 Split point F3 E-15 Controlling the Keyboard Sounds Controlling the Keyboard Sounds 5. Pressing co again to unsplit the keyboard (so it plays only the tone you selected in step 1). • Each press of co toggles between split (two tones) and unsplit (one tone). • If you turn on both layer and split, layering will be applied to the right side range of the keyboard only. To change the split point 1. While holding down co, press the keyboard key where you want the split point to be. The key you press will become the lowest note of the right side range of the split keyboard. Example: Setting middle C (C4) as the split point. Key name C4 Using Reverb Reverb adds reverberation to notes. You can change the duration of the reverb. 1. Press ct (FUNCTION) and then use the br (10-key) [4] (o) and [6] (p) keys to display “Reverb” (page E-7). Reve r b 2. Use the br (10-key) [–] and [+] keys to select the reverb setting you want. Off (oFF) Turns off reverb. 1 to 10 The larger the number selected, the longer the reverb duration. Indicator disappears when reverb is turned off. Using Chorus Chorus is a function that adds depth and breadth to notes. It makes you sound as if you are playing multiple instruments. 1. Press ct (FUNCTION) and then use the br (10-key) [4] (o) and [6] (p) keys to display “Chorus” (page E-7). Cho rus 2. Use the br (10-key) [–] and [+] keys to select the chorus type you want. There are five chorus types, plus an off setting. Indicator disappears when chorus is turned off. • The actual effect produced by chorus depends on the tone you are using. Controlling the Keyboard Sounds Controlling the Keyboard Sounds Using a Pedal A pedal can be used to change notes in various ways while playing. • A pedal unit does not come with the Digital Keyboard. Purchase one separately from your retailer. See page E-3 for information about options. Connecting a Pedal Unit Connect an optional pedal unit. SUSTAIN/ASSIGNABLE JACK Selecting the Pedal Effect 1. Press ct (FUNCTION) and then use the br (10-key) [4] (o) and [6] (p) keys to display “OTHER” (page E-7). Flashes OT HER 2. Press br (10-key) [9] (ENTER) key. 3. Use the br (10-key) [4] (o) and [6] (p) keys to display “Jack”. 4. Use the br (10-key) [–] and [+] keys to select the pedal effect you want. • The following shows the available pedal effects. Sustain (SUS) Sustains notes played while the pedal is depressed. Organ and other similar tone notes are sustained even if the pedal is not pressed. Sostenuto (SoS) Sustains notes that are playing when the pedal is depressed before the keyboard keys are released. Soft (SFt) Slightly softens notes played while the pedal is depressed. Rhythm (rHy) Pressing the pedal starts and stops Auto Accompaniment or song playback. Changing the Pitch (Transpose, Tuning, Octave Shift) Changing the Pitch in Semitone Steps (Transpose) The transpose feature lets you change the pitch, in semitone steps. A simple operation lets you instantly change the pitch to match that of a singer. • The transpose setting range is –12 to +12 semitones. 1. Press ct (FUNCTION). Tr ans . 2. Use the br (10-key) [–] and [+] keys to select the transpose setting you want. English Jac k E-17 Controlling the Keyboard Sounds Controlling the Keyboard Sounds Fine Tuning (Tuning) Use the tuning feature when you need to adjust the pitch slightly to play along with another musical instrument. Also, some artists perform their music with slightly altered tuning. You can use the tuning feature to adjust tuning so it exactly matches a performance on a CD. • The tuning feature specifies the frequency of the A4 note. You can set a frequency within the range of 415.5 to 465.9 Hz. The initial default setting is 440.0 Hz. 1. Press ct (FUNCTION) and then use the br (10-key) [4] (o) and [6] (p) keys to display “Tune”. Tu n e 2. Use the br (10-key) [–] and [+] keys ...