Évaluations - 0, GPA: 0
(
)
)
|
Par ce dispositif a également d'autres instructions :
Facilité d'utilisation
1 Double-click on the “Acroread_” folder. Four different language folders will be displayed. 2 Select the language you want to use and double-click on its folder. The file “ar***.exe” file will be displayed. (“***” indicates the selected language.) 3 Double-click on “ar***.exe.” Acrobat Reader Setup Dialog box will be displayed. 4 Execute the installation by following the on-screen directions. After installation is complete, the Acrobat folder appears on your PC (in Program Files, as the default). For information on using the Acrobat Reader, refer to the Reader Guide in the Help menu. USB MIDI Driver To operate the TYROS from your computer via USB, you’ll need to install the appropriate driver software. The USB-MIDI driver is software that transfers MIDI data back and forth between sequence software and the TYROS via a USB cable. Computer Sequence Software Driver TYROS USB cable > Windows 98/Me users See below. > Windows 2000 users See page 5. > Windows XP users See page 6. • Before you install the USB MIDI driver, you can minimize the possibility of problems by putting your computer in the following state. • Close all applications and windows that you are not using. • Disconnect all cables from the TYROS except for the cable whose driver you are installing. Installing the driver on a Windows 98/Me system 1 Start the computer. 2 Insert the included CD-ROM into the CD-ROM drive. 3 Make sure the POWER switch on the TYROS is set to OFF and use the USB cable to connect the USB terminal of the computer (or the USB hub) to the USB terminal of the TYROS. When the TYROS is turned on, the computer automatically displays the “Add New Hardware Wizard.” If the Add New Hardware Wizard does not appear, click “Add New Hardware” in the Control Panel. • In Windows Me, check the radio button to the left of “Automatic search for a better driver (Recommended)” and click [Next]. The system automatically starts searching and installing the driver. Proceed to step #8. If the system does not detect the driver, select “Specify the location of the driver (Advanced)” and specify the CD-ROM drive’s “USBdrv_” to install the driver. Windows 98 Windows Me 4 TOOLS for TYROS INSTALLATION GUIDE For Windows Users For Windows Users Click [Next]. The window below enables you to select the search method. 5 Check the radio button to the left of “Search for the best driver for your device. (Recommended).” Click [Next]. The window that enables you to select a location in which to install the driver appears. 6 Check the “CD-ROM drive” box and uncheck all other items. Click [Next]. • The system may ask you to insert a Windows CD-ROM while it checks for the driver. Specify the “USBdrv_” directory of the CDROM drive (such as D:\USBdrv_\) and continue the installation. 7 When the system detects the driver on the CD-ROM and is ready for installation, it displays the following screen. Make sure that the “YAMAHA USB MIDI Driver” is listed, and click [Next]. The system starts the installation. 8 When the installation is complete, the following screen appears. Click [Finish]. • Some computers may take about ten seconds to show this screen after the installation is complete. Windows 98 Windows Me The driver has been installed. Installing the driver on a Windows 2000 system 1 Start the computer and use the “Administrator” account to log into Windows 2000. 2 Select [My Computer] > [Control Panel] > [System] > [Hardware] > [Driver Signing] > [File Signature Verification], and check the radio button to the left of “Ignore -Install all files, regardless of file signature” and click [OK]. 3 Insert the included CD-ROM into the CD-ROM drive. 4 Make sure the POWER switch on the TYROS is set to OFF and use the USB cable to connect the USB terminal of the computer (or the USB hub) to the USB terminal of the TYROS. When the TYROS is turned on, the computer automatically displays the “Found New Hardware Wizard.” Click [Next]. 5 Check the radio button to the left of “Search for a suitable driver for my device. (Recommended).” Click [Next]. The window that appears enables you to select a location in which to install the driver. 6 Check the “CD-ROM drives” box and uncheck all other items. Click [Next]. • The system may ask you to insert a Windows CD-ROM while it checks for the driver. Specify the “USBdrv2k_” directory of the CDROM drive (such as D:\USBdrv2k_\) and continue the installation. 7 When the installation is complete, the system displays “Completing the Found New Hardware Wizard.” Click [Finish]. • Some computers may take about ten seconds to show this screen after the installation is complete. 8 Restart the computer. The driver has been installed. TOOLS for TYROS INSTALLATION GUIDE 5 For Windows Users For Windows Users 1 Start the computer. 2 Select [Start] > [Control Panel]. If the control panel appears as shown below, click “Switch to Classic View” in the upper left of the window. All control panels and icons will be displayed. 3 Go to [System] > [Hardware] > [...