Évaluations - 0, GPA: 0
(
)
)
|
Photos et spécifications Yamaha Tyros4 |
Par ce dispositif a également d'autres instructions :
Facilité d'utilisation
Use this to make the recorded audio as loud as possible, without distortion. Technically, this operation scans the recorded file for the highest level, then raises the volume of the entire file so that the highest peak is set to the maximum, non-distorting level. Normalization is calculated for the loudest signal found in either channel of the stereo recording and the same gain is applied to both channels. 1 Press the [F] (TRACK SELECT) button to select the track to be normalized. 2 Press the [I] (NORMALIZE) button. 3 At the prompt, press the [G] (OK) button to start normalizing the selected track. To cancel the operation, press the [H] (CANCEL) button. (2) Adjusting the Volume Balance On the TRACK PLAY meter, you can adjust the volume of Main and Sub tracks separately. Use the [2 ..]/[3 ..] buttons or sliders to adjust the Main/Sub track volume. By using the [1 ..]/[4 ..] buttons, you can also mute the Main/Sub tracks. (3) Deleting a Track 1 Press the [F] (TRACK SELECT) button to select the track to be deleted. 2 Press the [H] (TRACK DELETE) button. 3 At the prompt, press the [G] (OK) button to start deleting the selected track. If you want to undo the operation, press the [G] (UNDO) button just after pressing the [G] (OK) button. NOTE To control overall volume of the audio file, press the [BALANCE] button once or twice to call up the BALANCE (2/2) display, then use the [5 ..] slider or buttons. 88 Tyros4 Reference Manual Re-recording the Multi Track Recording File The created Multi Track recording data can be re-recorded in the following five ways. • Replace the whole data: NORMAL REC ........................................................See below • Mix the recorded data: NORMAL REC (PLUS PLAYBACK).......................See below • Replace a certain range of the data: PUNCH IN/OUT .................................See page 90 • Overdub a certain range of the data: PUNCH IN/OUT (MERGE) ..............See page 90 • Merge the Main and Sub tracks to the Main track: BOUNCE .................................................................................................See the Owner’s Manual. NORMAL REC / NORMAL REC (PLUS PLAYBACK) NOTE Re-recording of the data repeatedly will result in deterioration of the sound quality. NOTICE The data is automatically saved in the internal HDD, but you want to backup your data before rerecording. Copying is the easiest way to do this. However, since copying within a folder in the HDD is not possible, you need to create a new folder. For details on file management, refer to the Owner’s Manual. You can replace the whole audio data of a track by NORMAL REC or mix the audio data with the previous one by NORMAL REC (PLUS PLAYBACK). The NORMAL REC (PLUS PLAYBACK) method does not add any tracks but simply mixes the new recording to the existing data. After stopping recording, the data will be erased from the stop point. 1 Execute Steps 1–2 in “Editing the Recorded Data (Multi Track Recording File)” on page 87 to select the recorded data to be re-recorded. 2 Use the [F] (TRACK SELECT) button to select the track to be rerecorded. NOTE Since you will be overdubbing parts onto this audio, it’s best to keep the first recording simple. For example, you may want to record just a rhythm pattern (such as by playing back a Style) or a simple bass riff over which you can add other parts. 2 3 3 Use the [B]/[C] buttons to select a recording method. • Replace the whole data: NORMAL REC • Mix the recorded data: NORMAL REC (PLUS PLAYBACK) 4 If you select “NORMAL REC (PLUS PLAYBACK),” play back the recorded audio and practice the part that you want to overdub while the audio is playing. Change the volume settings if necessary. If you wish to add a keyboard-played Voice from the Tyros4, select the desired Voice. If you wish to record your singing voice or an external instrument, connect a microphone or instrument and make the appropriate settings. Adjust the Track Play and Rec Monitor levels here as desired. 5 Press the [REC] button to enable recording. 7 Audio Recorder/and Files – NEXT PAGE Tyros4 Reference Manual 89 6 6 Play the keyboard (or sing, etc.) and record your performance. 7 When finished recording, press the [STOP] button. After stopping recording, the data will be erased from the stop point. 8 To hear your new recording, press the [PLAY/PAUSE] button. If you’ve made a mistake or you’re not completely satisfied with your performance, press the [EXIT] button to return to the Multi Track Recorder display, then undo the NORMAL REC/NORMAL REC (PLUS PLAYBACK) operation by pressing the [G] (UNDO) button. PUNCH IN OUT / PUNCH IN OUT (MERGE) NOTE The playback sound of the other (not rerecorded) track is not recorded. NOTE The Audio Recorder/Player automatically reduces the level of the previous track by a certain, slight amount to accommodate the new recording. This is done to minimize possible distortion. You can use the Normalize effect to maximize the volume of the overall sound. For details,...