Évaluations - 2, GPA: 3.5
(
)
)
|
Facilité d'utilisation
206) Song arrangements (S01–S05) These are arrangements whose data is rewritable, and up to 5 different arrangements for each song can be stored on memory cards. Memory Card BR-900CD Preset Arrangement Song Song Arrangement Using the Rhythm Switching the Rhythm Mode The Rhythm mode switches each time [ARRANGE/ PATTERN/OFF] is pressed. [ARRANGE/PATTERN/OFF]: Lit (Arrangement Mode) Performance and programming of arrangements is enabled. Press [PLAY] to start the performance of the arrangement. * You cannot play back or record during programming. [ARRANGE/PATTREN/OFF]: Flashing (Pattern Mode) Performance and programming of patterns is enabled. Press [PLAY] to start the performance of the pattern. * You cannot play back or record during programming. [ARRANGE/PATTERN/OFF]: Unlit (OFF) The Rhythm does not play. Recording Rhythm Performances When you want to record Rhythm performances, be sure to record (bounce) in Bounce mode. You can have only the Rhythm performance be recorded by bringing down all of the faders except the Rhythm fader. For instructions on bounce recording, refer to “Putting Multiple Tracks Together (Bounce)” (p. 58). Performing Arrangements and Patterns Selecting arrangements This procedure selects the arrangement to be played with the Rhythm. 1. Press [ARRANGE/PATTERN/OFF] repeatedly until the indicator is lit. P: Preset / S: Song Arrangement NameNumber 2. Select the arrangement. Use CURSOR [ ] [ ] and the TIME/VALUE dial to select the Preset/Song and number. P01–P50: Preset arrangements 1–50 S01–S05: Song arrangements 1–5 3. Press [EXIT] to return to the Play screen. Performing arrangements 1. Make sure performance of the song is stopped, then press [ARRANGE/PATTERN/OFF] repeatedly until the indicator is lit. 2. Select an arrangement. Use CURSOR [ ] [ ] and the TIME/VALUE dial to select the Preset/Song and number. 3. Move the RHYTHM fader to the positions shown in the figure below. 4. Press [ZERO] to reset the play position back to the beginning of the arrangement, then press [PLAY]. The selected arrangement is performed. Section 121 Using the Rhythm Selecting patterns This selects the pattern to be played with the Rhythm. 1. Press [ARRANGE/PATTERN/OFF] repeatedly until the indicator is flashing. P: Preset / S: Song Pattern NameNumber 2. Select a pattern. Use CURSOR [ ] [ ] and the TIME/VALUE dial to select the Preset/Song and number. P001–P327: Preset patterns 1–327 S001–S100: Song patterns 1–100 3. Press [EXIT] to return to the Play screen. Performing patterns 1. Make sure performance of the song is stopped, then press [ARRANGE/PATTERN/OFF] repeatedly until the indicator is flashing. 2. Select a pattern. Use CURSOR [ ] [ ] and the TIME/VALUE dial to select the Preset/Song and number. 3. Move the RHYTHM fader to the positions shown in the figure below. 4. Press [PLAY]. The selected pattern is performed. No sound plays if “BREAK” is selected for the pattern. Changing the tempo of the arrangements or patterns You can temporarily change the tempo of the arrangement or pattern being played by carrying out the following procedure while the Play screen is displayed. * The arrangement’s tempo setting is temporarily disabled. 1. Press [CURSOR] and align the cursor up with “TEMPO” in the display. 2. Turn the TIME/VALUE dial to adjust the tempo. Tempo * The change in tempo is only temporary. If you want to change the arrangement’s actual tempo, refer to p. 123. * Tempos cannot be saved to patterns. Tapping to change the tempo of the arrangements or patterns You can temporarily change the tempo of the arrangement or pattern by the timing with which you press [TAP]. Tap on [TAP] four or more times to change the tempo of the arrangement or pattern. The tempo becomes that in which you tapped. * The change in tempo is only temporary. If you want to change the arrangement’s actual tempo, refer to p. 123. * Tempos cannot be saved to patterns. Creating Original Arrangements Creating Original Arrangements You can create arrangements (Song arrangements) of up to 999 measures. 1. Make sure performance of the song is stopped, then press [ARRANGE/PATTERN/OFF] repeatedly until the indicator is lit. 2. Press CURSOR [ ] [ ] and the TIME/VALUE dial to select the Arrangement number. 3. Press [EDIT]. The Arrangement Edit screen appears. 4. Press [CURSOR] to move the cursor to “STEP,” and press [ENTER]. The Recording Standby screen appears. * You cannot switch from the Recording Standby screen for arrangements to other screens (except for the drum kit selection screen). Step Pattern Number Starting Measure Time Signature Tempo Pattern Name Information about the performance is displayed in the matrix display at the bottom of the screen. 5. Press [CURSOR] to move the cursor to “Step,” then turn the TIME/VALUE dial to select the step to be edited. * You can press [REW] to move to the immediately preceding step, or press [FF] to move to the next step. 6. Press [CURSOR] to move the cursor to the parameter you want to change, ...
Ce manuel est également adapté pour les modèles :Instruments de musique - BR-900CD (11.39 mb)