Évaluations - , GPA:
(
)
)
Fabricant : Edelbrock
Taille : 34.75 kb
Nom Fichier : 350-8046.pdf
Langue d'enseignement: 
Le document est chargé, s'il vous plaît patienter
 |
Le document est chargé, s'il vous plaît patienter
Facilité d'utilisation
Failure to follow instruction will void warranty and may cause damage to parts and/or personal injury. If you have any questions or problems, please call our Technical Hotline at: 1-800-4168628, 7:00 am - 5:00 pm, Pacific Standard Time, Monday through Friday or e-mail us at Edelbrock@Edelbrock.com. PLEASE complete and mail your warranty card. Be sure to write the model number of this product in the “Part #_” space. • DESCRIPTION: The Edelbrock aluminum water pump is a heavy-duty water pump for both street and racing applications. The pump is externally the same as the original equipment pump (Ford #E9TE-8505-A4A) to provide compatibility with all accessories and pulleys. It offers increased durability and cooling potential. Part #8045 is a reverse rotation water pump for 1994-1995, 5.0L V8s with serpentine drive belt. Not for early standard rotation 289-302 engines. Polished aluminum water pump Part #8046 fits the same applications as Part #8045. • INSTALLATION: Installation is the same as for original equipment water pumps. Consult service manual for specific procedures, if necessary. • CAUTION: Be sure that fan bolts don't protrude through the hub so far that they hit the water pump housing. NOTE: Remove two screws from backing plate and apply RTV silicone to gasket just before installation. Re-assemble backing plate and install on engine using RTV silicone. • SPECIAL NOTES: Check closely for any interference with drive belts; some filing for clearance may be necessary with some applications. • SPECIFICATIONS: Dimension from block surface to hub: Part #8045 - 5-3/4”. • THANK YOU. ©2004 Edelbrock Corporation Rev. 1/04 Brochure #63-0232 MC VICTOR SERIES ALUMINUM WATER PUMPS For 1994-1995 F-Series Trucks with 5.0L, with Serpentine Belt Catalog #8045 (Unpolished) and #8046 (Polished) INSTALLATION INSTRUCTIONS Please study these instructions carefully before installing your new Edelbrock water pump. Failure to follow instruction will void warranty and may cause damage to parts and/or personal injury. If you have any questions or problems, please call our Technical Hotline at: 1-800-4168628, 7:00 am - 5:00 pm, Pacific Standard Time, Monday through Friday or e-mail us at Edelbrock@Edelbrock.com. PLEASE complete and mail your warranty card. Be sure to write the model number of this product in the “Part #_” space. • DESCRIPTION: The Edelbrock aluminum water pump is a heavy-duty water pump for both street and racing applications. The pump is externally the same as the original equipment pump (Ford #E9TE-8505-A4A) to provide compatibility with all accessories and pulleys. It offers increased durability and cooling potential. Part #8045 is a reverse rotation water pump for 1994-1995, 5.0L V8s with serpentine drive belt. Not for early standard rotation 289-302 engines. Polished aluminum water pump Part #8046 fits the same applications as Part #8045. • INSTALLATION: Installation is the same as for original equipment water pumps. Consult service manual for specific procedures, if necessary. • CAUTION: Be sure that fan bolts don't protrude through the hub so far that they hit the water pump housing. NOTE: Remove two screws from backing plate and apply RTV silicone to gasket just before installation. Re-assemble backing plate and install on engine using RTV silicone. • SPECIAL NOTES: Check closely for any interference with drive belts; some filing for clearance may be necessary with some applications. • SPECIFICATIONS: Dimension from block surface to hub: Part #8045 - 5-3/4”. • THANK YOU. ©2004 Edelbrock Corporation Brochure #63-0232 Rev. 1/04 MC...