Damaged protection devices or parts must be repaired or replaced by an qualified specialist. Have damaged switches replaced by a service centre. Do not operate electric tool if the switch can not be turned ON or OFF. Keep handles free of oil and grease. 9 ENGLISH 3.3 Safety devices Safety valve The spring safety valve (12) is incorporated into the pressure switch unit. The safety valve opens if the max. permissible pressure is exceeded. 4.1 Mains connection BDanger! High voltage Operate device i

Also, retain proof of purchase in case of a warranty claim. • This tool must not be sold or lent to someone else without being accompanied by these operating instructions and all other documents supplied with the tool. The manufacturer is not liable for any damage arising from neglect of these operating instructions. Information in these instructions is denoted as under: Danger! Risk of personal injury or environmental damage. Caution! Risk of material damage. Note: Additional information. . Num

• The Company does not accept responsibility if safety regulations are not met during handling, operation, maintenance and repair, even though these are not strictly stated in these operating instructions. • We recommend the notice of these operating instructions verified by the operating personnel in writing (personnel file). • We recommend translation of these operating instruction into native language of foreign workers. • The usability and the life cycle of the compressed air- dryer as well

If the condensate volume deviates from the set values (see 4.6.1.6) the adaptation to the specific characteristics of compressed air system is possible (see 4.6.1.6) Once the container has filled with condensate, so that the capacitive level sensor emits a signal, the internal solenoid valve opens and the condensate is forced by the working pressure into the discharge pipe. The condensate drain electronic system ensures the closing of the outlet opening before any compressed air can escape. For