D Quality Innovation Style O- 03P-0043/AC Manual_fnl 5/28/03 12:22 PM Page 2, English Table of Contents: Introduction 1 How Your System Works 1 How to Operate 2-3 System Maintenance 3-5 "Tips on Saving Energy 5 Service Calls 6 INTRODUCTION Congratulations on the purchase of your new Haier Heat Pump. This Haier product has been engineered and manufactured to a world-class quality standard and it has passed vigorous factory inspections and tests to ensure years of satisfactory serv

If the refrigerant needs to be removed from a system to correct the charge inside, always use a recovery or recycling device. ! WARNING -To prevent personal injury, wear safety glasses and gloves when handling refrigerant. 10 5 5 The condensing unit rating plate and the tables of "Physical and Electrical Specifications / Outdoor Units" (Table 1) provide pertinent data necessary for the selection of proper size electrical service and over-current protection devices. Table 6 provides data on the m

The Figure 2 show a schematic of a heat pump on the cooling cycle and the heating cycle. Table 1: Model:HR18-36D2VAR MODEL: HR18D2VAR HR24D2VAR HR30D2VAR Unit Supply Voltage Normal Voltage Range Minimum Circuit Amps 208/230 60Hz 1PH 197 - 253 7.6 10.9 14.0 Max Fuse or Max CKT. BKR. (HACR per NEC ) 2 HR36D2VAR 30 16.4 11.8 78 1.6 1/3 1120 3/8"[9.52] 7/8"[22.2] 148.41[4200] [616*616*771] [682*682*813] 207[94] 222[101] 24 1/4"*24 1/4"*30 3/8" 26 7/8"*26 7/8"*32" ]0592[42.401 ]0503[77.701 ]67[761 ]3

Note the following guidelines: 10" Min. Service Access 18" Min. Figure 3 10" Min. 10" 10" Service Access 18" Min. OUTDOOR UNIT OUTDOOR UNIT LIQUID LINE PITCH SUCTION LINE TOWARD OUTDOOR UNIT 1/2" FRO EVERY 10' OF LINE INDOOR UNIT ABOVE OR LEVEL TO OUTDOOR UNIT INDOOR UNIT ADDITIONAL SUCTION LINE OIL TRAP FOR EACH 20 FOOT RISE OF PIPE INDOOR UNIT LIQUID LINE SUCTION LINE OIL TRAP WHEN INDOOR UNIT IS 4 FEET OR MORE BELOW OUTDOOR UNIT INDOOR UNIT BELOW OUTDOOR UNIT 70' MAX. INVERTED LOOP LIQUID LIN

Failure to follow these instructions may result in improper installation, adjustment, service or maintenance possibly resulting in fire, electrical shock, property damage, personal injury or death. This product is designed and manufactured to permit installation in accordance with National Codes. It is the installer's responsibility to install the product in accordance with National Codes and/or prevailing local codes and regulations. The manufacturer assumes no responsibility for equipment inst