6 Connect the DC power output connector of the 12 Volt/ 200mA AC/DC adapter to the DC POWER INPUT JACK at the back of the transmitter. 7 Connect the 12 Volt/200mA AC/DC adapter to the mains socket. Always remove the adapter from the mains socket if the transmitter will not be used for a period of time. Charging the headphone 8 Place the headphone onto the energizing docking station, and make sure the charging pins of the transmitter and the charging contact of the headphone are well aligned. The

Wrong headphone orientation Reposition the headphone with correct when placed onto the charging orientation. dock 12 ENGLISH No sound / Headphone power off Switch on the POWER button of the distorted sound headphone. The POWER STATUS light will be illuminated in red. No battery installed Follow step 1 to 4 of ‘Installing/replacing the batteries’ Wrong battery orientation Reposition the batteries according to the engraved polarity symbol. No power supply to transmitter Make sure the docking stati

The louder the volume, the shor ter is the safe listening time. Be sure to observe the following guidelines when using your headphones. • Listen at reasonable volumes for reasonable periods of time. • Be careful not to adjust the volume continuously upwards as your hearing adapts. • Do not turn up the volume so high that you can’t hear what’s around you. • You should use caution or temporarily discontinue use in potentially hazardous situations. • Excessive sound pressure from earphones and head

• Radio equipment for wireless audio applications is not protected against disturbance from other radio services. • Do not use cleansing agents containing alcohol, spirits, ammonia or abrasives as they may harm the housing. Use a slightly dampened chamois cloth to clean the housing. • If fluid spills into the headphone system, remove the batteries immediately and consult an authorized dealer. • Do not use this product in damp places or close to water. • Do not expose this product to extreme heat

Multiple headphones with one transmitter An additional number of headphones can be used with a single transmitter if they operate on the same frequency. Please consult the appliance’s electrical specification sheets for confirmation on compatibility. Rechargeable system The IR transmitter recharges the headphone’s rechargeable R03/AAA NiMH batteries. First switch off the headphone. Then connect the charging cable between the headphone and the transmitter.The green LED on the headphone will light