Évaluations - 4, GPA: 4.3
(
)
)
|
Facilité d'utilisation
Do not use benzene, thinner, or rubbing alcohol. Doing so may adversely affect the surface, e.g., discoloration. In addition, do not use commercially-available household cleaners and cosmetics, as they may contain components harmful to the surface. or Two quick taps, but on the second tap leaving your finger down (applying pressure) and moving it on the work surface. While holding down the button, moving your finger on the work surface. or Function Touch Pad Operation Moving the Cursor Tapping/Clicking Double-Tapping/ Double-Clicking Dragging or Move the tip of your finger lightly over the surface. tapping clicking double-tapping Left Button Right Button Work Surface double-clicking Touchscreen (Basic Operation ) Your computer is equipped with a touchscreen function allowing you to perform the same operations as the touch pad or mouse by touching the surface of the display with the stylus (included). (The following explanation gives one example (for the default settings).) The operation settings can be changed. For detailed information, refer to “Touchscreen”. Moving the cursor Clicking Cursor One tap Stylus Double-clicking Dragging Operation Touch and hold the object (i. e. file or icon), move the stylus on the surface (dragging the object to the desired location), then release the stylus. Two quick taps To right-click: 1 Select on the taskbar. changes to . 2 Select the object you want to right-click. NOTE Handling the Touchscreen Use the stylus included with the computer. Do not use an implement other than the stylus that comes with the computer. Do not place any object on the surface or press down forcefully with sharp-pointed objects (e.g., nails), or hard objects that can leave marks (e.g., pencils and ball point pens). Do not operate the computer when such things as dust are on the screen. Do not allow contact with substances that could dirty the touchscreen, such as oil. When the touchscreen becomes dirty: Wipe to remove dirt by using a dry soft cloth included with the computer. • Do not use benzene or thinner, or rubbing alcohol. • For more information, refer to “Suggestions About Cleaning the LCD Surface” that comes • with the soft cloth. Handling the Stylus Clean the stylus tip and screen prior to operation. Foreign particles can scratch the screen and impede the operation of the stylus. Use the stylus only for the computer screen. Using it for any other purpose may damage the stylus and scratch the screen. 22Operation Operating in Tablet Mode Usage Example In Tablet Mode, the computer can be operated while holding the body as shown in the figure. In addition to being used as a regular notebook computer (Laptop mode), this computer can also be operated in Tablet mode. Simply turn the display around 180°, and close the computer with the display facing up. In Tablet mode, the computer can be operated using the touchscreen ( page 21), the software keyboard and the tablet buttons ( “Tablet Buttons”), instead of the internal keyboard and the touch pad. Set the computer in Tablet mode using the following procedure. 1 Open the display so that it is perpendicular with the body of the computer. 2 Slide the latch C to the right, and then without releasing it, turn the display clockwise by 180°. 3 Close the computer with the display facing up. CAUTION Do not rotate the display more than 180°, or attempt to rotate the display counterclockwise. 2 1 3 4 5 Latch A Latch B To return to Laptop mode: Perform the steps for changing the computer into Tablet mode, only in reverse order. 1 Pull up on latch A and release the latch B. 2 Open the display. 3 Slide the latch C to the right, and then without releasing it, turn the display counter-clockwise by 180°. NOTE 4 Pull up on the latch A. 5 Position the latch B on the display side, then bring the latch A down to fix the display in place. Latch A 2 2 Latch C Latch C Changing the Display Setting s To rotate the display Stylus Press the rotation button until the display is set at the angle that is most comfortable for you. For detailed information, refer to “Display Rotation” Tablet Buttons LCD brightness control Input Panel Enter You can set the computer so that the display automatically rotates to your preferred angle when changing from Laptop Mode to Tablet Mode or vice versa. ( “Display Rotation”) NOTE Rotation To adjust the brightness of LCD Security Press the LCD brightness control buttons . Inputting Characters Press the input panel button . The software keyboard shown below will appear, and characters can be input with the stylus (included). For detailed information,, refer to “Software Keyboard”. Operation You can also start up the software keyboard using the following procedure. Select [start] - [All Programs] - [Panasonic] - [Software Keyboard]. When using the touchscreen function, use only the stylus included with the computer. NOTE Reference Manual The Reference Manual and the Important Tips can be accessed on your computer. When a printer is connected, thes...