Mount the CD-ROM pack in the multimedia pocket. (Refer to the operating instructions of the CD-ROM pack for details.) *DVD-ROM drive pack (CF-VDD271 ) can be also used. # Important • Save all important data. If reinstallation is carried out, all data existing prior to the installation will be lost. The reinstallation will return the computer to close to the conditions at time of purchase. • Before the re installation procedure, remove all peripherals (except for the CD-ROM drive and FD drive). • Be sure the AC adapter is connected until the reinstallation procedure is completed. Reinstalling Windows 95 - If data on your hard disk is compressed, the data should be uncompressed._j 1 Set the CD-ROM pack in the multimedia pocket, and turn the computer on. 2 When the message [Press to enter SETUP] is displayed, press ( F2 ) and then run the Setup Utility. . If the password has been set, enter the supervisor password. 3 Press fF9). At the confirmation message, select [Yes] and press ( Enter ). 4 Select [Security] menu and set [Boot Up Drive] to [CDD,DVD/A:/C:]. 5 Set the Product Recovery CD-ROM in the CD-ROM drive. 6 Press CeBD At the confirmation message, select [Yes] and press ( Enter 1 The computer will reboot, and this screen should appear. Select the number 26 2. Restore the drive C to factory default 3. End 7 Make a selection from the menu. To restore all contents of the hard disk to factory default, including the partition setting(s): Select [1. Restore the whole HDD to factory default]. To restore the hard disk (C drive) to factory default, excluding the partition setting(s): Select [2. Restore the drive C to factory default]. 8 At the confirmation message , press CD The operations of “format” and “restore” for the hard disk start automatically. (The operations take about one hour.) 9 After the "restore" procedure completes, remove the Product Recovery CD-ROM, then close the tray. 10 Turn the computer off and remove the CD-ROM pack. 11 Set the floppy disk drive in the multimedia pocket, set the FIRSTAID FD and turn the computer on. Simply follow the on-screen instructions. 12 After the reinstallation procedure completes, the following message will appear on the display. All data on the whole HDD has been restored to the factory default. After removing floppy disk , restart (he computer and set up Windows 95 again. Restart the computer by pressing fCtrP+fÄIP +ГР0П. and perform the setup procedure for Windows 95 by following the instructions on the screen. O’ page 8 During the reinstallation procedure, the settings of the Setup Utility are changed as follows. When necessary, please change these settings again. Power Menu Power Management Mode :Disable Power Switch :Off When necessary, in the Setup Utility, set JBoot Up Drive] to [A:/C:]. Installing Acrobat® Reader 3.01 O’ page 9, Step 8 Port Replicator (Option) After reinstalling the software on the hard disk, the reinstallation procedure in the operating instructions that accompany the port replicator is not required. LIMITED USE LICENSE AGREEMENT THE SOFTWARE PROGRAM(S) ("PROGRAMS") FURNISHED WITH THIS PANASONIC® PRODUCT ("PRODUCT") ARE LICENSED ONLY TO THE END-USER ("YOU"), AND MAY BE USED BY YOU ONLY IN ACCORDANCE WITH THE LICENSETERMS DESCRIBED BELOW.YOUR USE OFTHE PROGRAMS SHALL BE CONCLUSIVELY DEEMED TO CONSTITUTE YOUR ACCEPTANCE OF THE TERMS OF THIS LICENSE. Matsushita Electric Industrial Co., Ltd. ("MEI") has developed or otherwise obtained the Programs and hereby licenses their use to you. You assume sole responsibility for the selection of the Product (including the associated Programs) to achieve your intended results, and for the installation, use and results obtained therefrom. LICENSE A. MEI hereby grants you a personal, non-transferable and non-exclusive right and license to use the Programs in accordance with the terms and conditions stated in this Agreement. You acknowledge that you are receiving only a LIMITED LICENSE TO USE the Programs and related documentation and that you shall obtain no title, ownership nor any other rights in or to the Programs and related documentation nor in or to the algorithms, concepts, designs and ideas represented by or incorporated in the Programs and related documentation, all of which title, ownership and rights shall remain with MEI or its suppliers. B. You may use the Programs only on the single Product which was accompanied by the Programs. C. You and your employees and agents are required to protect the confidentiality of the Programs. You may not distribute or otherwise make the Programs or related documentation available to any third party, by time-sharing or otherwise, without the prior written consent of MEI. D. You may not copy or reproduce, or permit to be copied or reproduced, the Programs or related documentation for any purpose, except that you may make one (1 ) copy of the Programs for backup purposes only in support of your use of the...
)
