Log:
Évaluations - 2, GPA: 4 ( )

Instructions Toshiba, Modèle Satellite L15-S1041

Fabricant : Toshiba
Taille : 2.04 mb
Nom Fichier :
Langue d'enseignement:
Aller à la télécharger



Facilité d'utilisation


. To leave the computer off for a longer period, you can use the Windows Turn Off command when not connected to a domain server or the Shut down command when connected to a domain server instead. Never turn off the computer while any drive is in use. Doing so may damage the media in use and result in loss of data. For more information, see “Powering down the computer” on page 96. 66 66 66d Using external display devices Closing the display panel When you are finished, shut the computer down and close the display panel to keep dust and dirt out of the computer. If you close the computer while it is still on, these actions will occur: . If you have the LCD power-saver feature set, the LCD panel will automatically turn off until you open it again. . If you have the audible warning set, the computer will beep to notify you that it is still on. . If you have an action feature set, the computer will perform either: Nothing, Standby, Hibernate, or Turn Off (see “Setting user passwords” on page 143). Using external display devices Your computer comes with a built-in LCD display, but you can also connect an external display device to the available video port: . An external monitor or projector via the RGB (monitor) port. Before connecting an external monitor or video projector, configure your computer for the type of device you are connecting. To do this, refer to the documentation for your operating system and devices. Connecting an external monitor or projector You can easily attach an external monitor or projector to your computer if you need a larger screen. To do this: 1 Connect the monitor’s video cable to the RGB (monitor) port on the left side of the computer. 2 Connect the device’s power cable to a live electrical outlet. Getting Started Getting Started Using external display devices 3 Turn on the external device. 4 Set the display mode by pressing Fn + F5, or by configuring the Display Properties settings. Directing the display output when you turn on the computer Once you have connected an external display device, you can choose to use the internal display only, the external device only, or both simultaneously. The quickest way to change the display output settings is to use the display hot key (Fn + F5): 1 Press Fn and F5 simultaneously. 2 While holding down Fn, press F5 repeatedly, pausing between each press, until the setting you want takes effect. Briefly pause between pressing the F5 key to allow time for the display to change. This hot key cycles through the settings in the following order: . Built-in display only . Built-in display and external monitor simultaneously . External monitor only . TV and LCD . TV only 3 Release the Fn key. TECHNICAL NOTE: You can also change these settings using the Display Properties Box. Set the option for the video controller by clicking Start, then Control Panel, Appearance and Themes, and then D...

Ce manuel est également adapté pour les modèles :
Ordinateurs portables - Satellite L15-S104 (2.04 mb)
Ordinateurs portables - L15-S104 (2.04 mb)
Ordinateurs portables - L15-S1041 (2.04 mb)

Écrivez votre propre critique du dispositif



Texte du message
Votre nom :
Entrez les deux chiffres :
capcha





catégories