Évaluations - 0, GPA: 0
(
)
)
|
Par ce dispositif a également d'autres instructions :
Facilité d'utilisation
NOTE: Successful password changes take effect immediately.
This field lets you set, change, or delete the password on the system's internal hard disk drive (HDD). Successful changes take place
Internal HDD
immediately and require a system restart. The HDD password travels with the hard drive, so the HDD is protected even when installed in
Password
another system.
Allows you to bypass the system and internal hard drive password prompts when your computer restarts or resumes from standby.
Password
You can set Password Bypass to: Disabled, Reboot Bypass, Resume Bypass, and Reboot & Resume Bypass.
Bypass
NOTE: You cannot bypass the system or hard drive password when you turn on your computer that has been shut down.
Password
Allows you to enable or disable changes to the System and hard drive passwords when the admin password is set.
Change
Allows you to enable or disable the optional Computrace software. The options are Deactivate, Disable, and Activate.
Computrace
NOTE: The Activate and Disable options will permanently activate or disable the feature and no further changes will be allowed.
Allows you to enable or disable the Execute Disable mode of the processor.
CPU XD Support
Default setting: Enabled
Performance
Option
Description
Intel SpeedStep
Enables or disables the Intel SpeedStep feature.
Power Management
Option
Description
Wake on AC
Allows you to enable or disable the computer from turning on automatically when an AC adapter is connected.
Allows you to set the time at which the computer must turn on automatically.
Auto On Time
You can set the days on which you want the computer to turn on automatically. The settings are Disabled, Everyday, or Weekdays.
Default setting: Disabled
Allows you to enable or disable the ability of USB devices to wake the computer from Standby.
USB Wake
Support
This feature is only functional when the AC power adapter is connected. If the AC power adapter is removed during Standby, the BIOS will
remove power from all of the USB ports to conserve battery power.
Allows the computer to turn on by a special LAN signal or from Hibernate state when triggered by a special wireless LAN signal. Wake-up
from the Standby state is unaffected by this setting and must be enabled in the operating system.
Wake on LAN
l
Disabled — Do not allow the system to power on when it receives a wake-up signal from the LAN or wireless LAN.
l
LAN Only — Allow the system to be powered on by special LAN signals.
The factory default setting is Disabled.
Allows you to enable or disable the ExpressCharge feature.
ExpressCharge
NOTE: ExpressCharge may not be available for all batteries.
Allows you to enable or disable the battery charger. If disabled, the battery will not lose power when the system is connected to an AC
Charger
adapter but it will not charge either.
Behavior
Default setting: Charger Enabled
POST Behavior
Option
Description
Allows you to enable or disable the BIOS warning messages when you use certain power adapters. The BIOS displays these messages if
Adapter
you attempt to use a power adapter that has too little capacity for your configuration.
Warnings
The factory default setting is Enable Adapter Warnings.
Allows you to select one of two methods to enable the keypad that is embedded in the internal keyboard.
l
Fn Key Only — The keypad is only enabled when you hold down the
l
By Num Lk — The keypad is enabled when (1) the Num Lock LED is on and (2) no external keyboard is attached. Note that the
Keypad
system might not notice immediately when an external keyboard is detached.
(Embedded)
NOTE:When Setup is running, this field has no effect—Setup works in the Fn Key Only mode.
Default setting: Fn Key Only.
Allows you to enable or disable the Num Lock LED when the computer boots.
Numlock LED
Default setting: Enabled.
Defines how the BIOS handles the USB devices. USB emulation is always enabled during POST.
USB Emulation
The factory default setting is Enabled.
Allows you to use the
keyboard.
Fn Key
NOTE: USB keyboards cannot emulate the
Emulation
keyboards will only emulate the
Default setting: Enabled.
...