Évaluations - 0, GPA: 0
(
)
)
|
Par ce dispositif a également d'autres instructions :
Facilité d'utilisation
User
Remedial Action (Action
Reference
Accessible
Description
Volatility Description
necessary to prevent loss of
Designator
for external
data)
data
RTC
PCH1
Non Volatile memory 256
No
NA
CMOS
bytes
Stores CMOS information
Video
UMA
Volatile memory in off state. No
Power off
memory – architectur
frame
e- uses
UMA uses main system
buffer
system
memory size allocated out
DDR3L.
of main memory.
Hard
User
Non Volatile magnetic
Yes
Low level format
drive(s)
replaceable, media, various sizes in GB.
one or two
May also be SSD (solid state
flash drive)
mSATA
WWAN1
mSATA module would share Yes
NA
with WWAN module on full
size mini-card. Non Volatile
memory (SSD)
CAUTION: All other components on the system board lose data if power is removed from the system. Primary power
loss (unplugging the power cord and removing the battery) destroys all user data on the memory (DDR3L). Secondary
power loss (removing the on-board coin-cell battery) destroys system data on the system configuration and time-of-
day information.
In addition, to clarify memory volatility and data retention in situations where the system is put in different ACPI power states
the following is provided (those ACPI power states are S0, S1, S3, S4 and S5):
S0 state is the working state where the dynamic RAM is maintained and is read/write by the processor.
S1 state is a low wake-up latency sleeping state. In this state, no system context is lost (CPU or chip set) and hardware maintains
all system contexts.
S3 is called “suspend to RAM” state or stand-by mode. In this state the dynamic RAM is maintained. Dell systems will be able to
go to S3 if the OS and the peripherals used in the system supports S3 state. Linux, Win 2K and Win XP support S3 state.
S4 is called “suspend to disk” state or “hibernate” mode. There is no power. In this state, the dynamic RAM is not maintained. If
the system has been commanded to enter S4, the OS will write the system context to a non-volatile storage file and leave
appropriate context markers. When the system is coming back to the working state, a restore file from the non-volatile storage
can occur. The restore file has to be valid. Dell systems will be able to go to S4 if the OS and the peripherals support S4 state. Win
2K and Win XP support S4 state.
S5 is the “soft” off state. There is no power. The OS does not save any context to wake up the system. No data will remain in any
component on the system board, i.e. cache or memory. The system will require a complete boot when awakened. Since S5 is the
shut off state, coming out of S5 requires power on which clears all registers.
The following table shows all the states supported by Dell Latitude™ 3330:
Model Number
S0
S1
S3
S4
S5
Dell Latitude™
X
X
X
X
X
3330
...