Évaluations - 0, GPA: 0
(
)
)
|
Par ce dispositif a également d'autres instructions :
Facilité d'utilisation
Charging. Charge MacBook Pro only with the included 60W MagSafe 2 Power Adapter, or
with other third‑party cables and power adapters that are compatible with MagSafe 2 and are
compliant with applicable regulations.
Using damaged cables or chargers, or charging when moisture is present, can cause fire,
electric shock, injury, or damage to MacBook Pro or other property. When you use the included
60W MagSafe 2 Power Adapter to charge MacBook Pro, make sure that the AC plug or AC power
cord is fully inserted into the power adapter before you plug the adapter into a power outlet.
Prolonged heat exposure. MacBook Pro and its 60W MagSafe 2 Power Adapter may become
very warm during normal use. MacBook Pro and its 60W MagSafe 2 Power Adapter comply with
applicable surface temperature standards and limits defined by the International Standard for
Safety of Information Technology Equipment (IEC 60950‑1). However, even within these limits,
sustained contact with warm surfaces for long periods of time may cause discomfort or injury.
Use common sense to avoid situations where your skin is in prolonged contact with a device
or its power adapter when it’s operating or plugged into a power source. For example, don’t
sleep with a device or power adapter when it’s plugged into a power source. Don’t operate your
MacBook Pro on a pillow, blanket, or other soft material that can block ventilation openings. It’s
important to keep MacBook Pro and its 60W MagSafe 2 Power Adapter in a well‑ventilated area
when in use or charging.
Never push anything into the ventilation openings, as doing so may be dangerous and cause
your computer to overheat. Never place anything over the keyboard when operating your
MacBook Pro. If your MacBook Pro is on your lap and gets uncomfortably warm, remove it from
your lap and place it on a stable, well‑ventilated work surface. Take special care if you have a
physical condition that affects your ability to detect heat against the body.
60W MagSafe 2 Power Adapter. To operate the 60W MagSafe 2 Power Adapter safely and reduce
the possibility of heat‑related injury or damage, do one of the following:
• Plug the 60W MagSafe 2 Power Adapter directly into a power outlet.
• If you’re using the AC power cord, place the power adapter on a desk, table, or on the floor in a
well‑ventilated location.
Disconnect the power adapter and any other cables if any of the following conditions exists:
• You want to clean the case (use only the recommended procedure described in Important
handling information).
• The power cord or plug becomes frayed or otherwise damaged.
• Your MacBook Pro or 60W MagSafe 2 Power Adapter is exposed to rain, excessive moisture, or
liquid spilled into the case.
• Your MacBook Pro or 60W MagSafe 2 Power Adapter has been dropped, the case has been
damaged, or you suspect that service or repair is required.
The MagSafe 2 power port (where you plug in the MagSafe 2 power connector) contains a
magnet that can erase data on a credit card, iPod, or other device. To preserve your data, do not
place these or other magnetically sensitive material or devices within 1 inch (25 mm) of this port.
If debris gets onto the MagSafe 2 port, remove it gently with a dry cotton swab.
60W MagSafe 2 Power Adapter specifications:
• Frequency: 50 to 60 Hz, single phase
• Line Voltage: 100 to 240 V
• Output Voltage: 16.5 V DC, 3.65 A
Chapter 6 Safety, handling, and support
33
74% resize factor
...