Évaluations - 0, GPA: 0
(
)
)
|
Par ce dispositif a également d'autres instructions :
Ordinateurs portables - E555 (ThinkPad) (149.28 kb)
Ordinateurs portables - E555 (ThinkPad) (400.93 kb)
Ordinateurs portables - E555 (ThinkPad) (220.67 kb)
Ordinateurs portables - E555 (ThinkPad) (224.49 kb)
Facilité d'utilisation
FCC ID: PD97265NGU (Model: 7265NGW)
Notes:
• The wireless LAN and the Bluetooth features operate at different frequencies
exclusively, and transmit radio frequencies simultaneously.
•
The wireless LAN cards marketed in the USA and Canada do not support or
function in the extended channels (12ch, 13ch).
II. User installable wireless LAN and Bluetooth combo card
i) Use of the wireless LAN and Bluetooth combo card
If no integrated wireless LAN and Bluetooth combo card has been preinstalled in
your computer, you can install one, provided by Lenovo® as an option. Plug the
wireless LAN card into the wireless LAN card slot. For the installation procedure,
see “Replacing a wireless LAN card” in User Guide.
Attention: The computer contains an authentication mechanism. If you install
an unauthorized wireless communication card that is not approved for use in
your computer, the computer will not start, but only displays an error message
and emits audible beeps.
ii) FCC ID location
There is no FCC ID for the wireless LAN card shown on the enclosure of your
computer. Instead you will find an indicator pointing to the location of the FCC
ID on the bottom of your computer. The FCC ID is affixed on the approved
card installed in the wireless LAN card slot, and the FCC ID is visible prior to
installation. For the location of the FCC ID indicator and the slot, see “FCC ID and
IC Certification number information” in User Guide.
iii) FCC RF Exposure compliance
The radiated output power of the wireless LAN card authorized to use for your
computer is far below the FCC radio frequency exposure limits. Nevertheless, it
shall be used in such a manner that the potential for human contact during normal
operation is minimized as follows:
CAUTION:
To comply with FCC RF exposure compliance requirements, a separation
distance of at least 20 cm (8 inches) must be maintained between the
antennas connected to the wireless cards and all persons. If this distance
cannot be maintained while the computer lid is closed, you must select first
select sleep as the power mode prior to closing the display lid.
The transmission antennas for the wireless LAN card are located in the LCD cover.
See “Locating the UltraConnect wireless antennas” in User Guide.
2
...