Évaluations - 0, GPA: 0
(
)
)
|
Photos et spécifications Nikon Monarch 7 8x42 |
Facilité d'utilisation
p. 4-5 Espanol .......................................... p. 6-7 Francais .......................................... p. 8-9 Portugues brasileiro ................. p. 10-11 5 6 1 7 2 2 8 3 9 4 AB DC Nomenclature En Please refer to the numbered images on page 3. Es Fr 1Eyecup Pt 2Neck strap eyelet ITEMS SUPPLIED 3Focusing ring Binoculars x1 4Objective lens Eyepiece cap x1 5Interpupillary distance English Objective lens caps x2 6Dioptre ring Soft case x1 7Dioptre index Neck strap x1 80 (zero) dioptre position 9Central shaft Eyecups For directions in which to turn the eyecups, please refer to the image on page 3. .For eyeglass wearers, use fully retracted. To accurately adjust your view, you can also use two click stops before reaching the fully retracted position. .For non-eyeglass wearers, use fully extended. To accurately adjust your eye position, you can also use two click stops before reaching the fully extended position. Neckstrap and caps during observation Please refer to images A, B, C and D on page 3. Neck Strap Attach the neckstrap as illustrated (A), paying special attention to avoid twisting the strap. Attach the objective lens caps (B), making sure the cap part hinges open downward from the binocular tube when folded open. The slit should be visible at the left side of each binocular tube, viewed from the eyepiece side, to confirm correct positioning (correctly attached when supplied). Fr Es Pt Eyepiece cap There are two ways you can position the eyepiece cap as you observe your subject. . Remove the eyepiece cap from the eyepieces and allow it to hang from the neckstrap. . Remove the eyepiece cap from the eyepieces, then detach the right strap from the cap and allow it to hang from the left neckstrap (C). To attach/detach caps from the neckstrap as shown in image (D) in the following order: . Attaching: c > b > a . Detaching: a > b > c Flipdown objective lens caps The binoculars are used with the objective lens caps folded open (C). En En En Specifications Es Fr Pt Type: Dach prism central focusing type Model 8x42 10 x42 Magnification (x) 8 10 Effective diameter of objective lens (mm) 42 42 Angular field of view (real) (°) 8.0 6.7 Angular field of view (apparent) (°)* 58.4 60.7 Field of view at 1,000m/yds. (m/f t.) 14 0/420 117/351 Exit pupil (mm) 5.3 4.2 Brightness 28.1 17.6 Eye relief (mm) 17.1 16. 5 Close focusing distance, approx. (m/ft.) 2.5/8.2 2.5/8.2 Interpupillar y distance adjustment (mm) 56 -72 56 -72 Length (mm/in.) 142/5.6 142 /5.6 Width (mm/in.) 130/5.1 130/5.1 Weight (g/oz .) 650/22.9 660/23. 3 Structure Waterproof (up to 1 metre for 10 minutes) and nitrogen gas filled* * The number calculated by the formula [tan .' = . x tan. ]: Apparent field of view: 2.', Magnification: . , Real field of view: 2. En En * Waterproof models: Es All models shown are waterproof, and will suffer no damage to the optical system if submerged or dropped Fr in water to a maximum depth of 1 meter for up to 10 minutes . Pt These products offer the following advantages: • Can be used in conditions of high humidity, dust and rain without risk of damage. • Nitrogen-filled design makes them resistant to condensation and mold. Observe the following when using these products: • As the unit does not have a perfectly sealed structure, it should not be operated nor held in running water. • Any moisture should be wiped off before adjusting movable parts (focusing knob, eyepiece, etc.) of these products to...
Ce manuel est également adapté pour les modèles :Instruments d'optique - Monarch 7 10x42 (928.73 kb)