Évaluations - , GPA: ( )

Instructions Newcon Optik, Modèle NZT1-M2

Fabricant : Newcon Optik
Taille : 208.69 kb
Nom Fichier : 30af09a1-be37-4c30-b2c9-068fefa05ccc.pdf

Langue d'enseignement:

Le document est chargé, s'il vous plaît patienter

Téléchargez votre Fermer

Le document est chargé, s'il vous plaît patienter

Téléchargez votre Fermer

• Do not apply superfluous efforts at work with lens assembly, agile elements and thread connections. • Due to considerable optical magnification of the eye-piece some small structures inside the tube coating in the form of dark and/or white points may be seen in the field of view which does not affect the serviceability of the • The resolving power (resolution) may change in the direction from the center towards the perimeter of the field of view. This is an inherent feature of the image tube type utilized in the device. We would recommend to place the scene of observation in the center Unit flashes It is normal for the unit to flash within the first 2 minutes of activation. If the flashing continues afterwards the following is a possible cause: bright environment (even with the cap closed !) Condensation accumulates on the parts. It is O.K. to use the scope in cold. However, when the unit is brought from the cold into a warm environment, it has to warm up for up to 5 hours (not minutes !). Only then it is allowed to turn it ON again. Visibility decreases and / or disappears. Bright light sources (moon, projectors or headlights) may cause visibility to degrade or even completely disappear. Move the scope away from the light source immediately. The image should be restored in within 2 minutes. Poor atmospheric conditions such as fog, haze or extremely dark environments, will decrease the visibility distance of the unit. 9. WARRANTY: NEWCON OPTIK warrants this product against defects and workmanship for one year from the date of the original date of consumer's purchase, but no more than 18 months from the date of manufacturing. Should your NEWCON product prove defective during this period, please bring the product securely packaged in its original container or an equivalent, along with proof of the date Photography 3. COMPONENTS When using the NZT1-M2 for photography, you are not supposed to obtain the same quality of pictures as taken in the NZT1-M2 is supplied with the following components: daytime. But you will have the possibility to get an image of the object that normally could not be seen in the dark by the naked eye. The user has a wide range of possibilities for experiments in the photography field by selecting different photo materials and changing of optics. Quality of pictures taken with a new lens or eyepiece may be estimated approximately by the object’s image when observing through the view-finder of your SLR cameral. 8. TROUBLESHOOTING The scope does not work. Check that the batteries are installed properly. Check the charge of the batteries. Replace if they are weak. Do not use old batteries with new ones. The image does not appear in focus. Bring the inspected object to the center of the image. Turning the eye-piece (9) adjust to achieve the clearest image on the screen. Then obtain the most clear-cut image of the object focusing with ring,(5). Repeat the steps of focusing if necessary If the view still does not seem in focus, clean the lenses; they could be foggy or dusty. NAME QUANTITY NZT1-M2 unit 1 Case 1 Carrying strap 1 Lens caps 1 AP-7 I/R illuminator 1 AP-7 lens cover 1 Tripod doubler 1 Lens cloth 1 Camera adapter 1 Byonet adapter (optional) 1 Manual 1 Warranty Registration Card 1 4. SPECIFICATIONS OF NZT1-M2 Magnification, X 2.4 Field of View, angl.., degrees, not less 15° Lens aperture 1.5 Dyoptric correction ± 5 Operating illumination from moon light to star’s light Power supply; Scope 9V AP-7 I/R Illuminator 3V 2AA Battery life, hours 10 Dimensions, mm 100.120.260 Weight, kg 1.1 NOTE: As the design is being continuously improved some descriptions may differ from those given above. optional byonet adapter 13 1. Body 2. Locking Screw 3. Lens 6. Tripod Socket 7. On/Off Switch 8. Battery House Cover 9. Eye- piece Focusing Ring Pic. 1 1. Body 2. Locking Screw 3. Lens 6. Tripod Socket 7. On/Off Switch 8. Battery House Cover 9. Eye- piece Focusing Ring Pic. 1 2. On/off Switch 4. Mount Screw5. Adjustable Angle Locking Ring 1. Body 3. Battery House Cover 6. Lens Focusing Ring Pic. 2 1. Body 2. On/Off Switch 3. Battery House Cover 4. Mount Screw 5. Adjustable Angle Locking Ring 6. Lens Focusing Ring 7. USING THE NZT1-M2 WITH CAMERA To use a camera with the NZT1-M2, use a camera with Pentax Screw type thread. Adapters for most other cameras should be available in your local camera store. A camera adapter is supplied with See Pic. 3 for attachment instructions. 5. CONSTRUCTION 4. IR Illuminator 5. Lens Focusing Ring 1. Body 2. Locking Screw 3. Lens 4. IR Illuminator 5. Lens Focusing Ring 6. Tripod Socket 7. On/Off Switch for the Scope 8. Battery House Cover 9. Eye-piece Focusing Ring 6. OPERATION INSTRUCTIONS WARNING! NEVER OPERATE YOUR NIGHT VISION DEVICE IN DAYLIGHT AREAS WITHOUT THE LENS COVER ON! NEVER DIRECT THE LENS IN THE DIRECTION OF BRIGHT LIGHT! 6.1 Pre-starting procedures. 1. Unpack the device. In order to install the battery, open battery house cover (8), and install the battery...