Log:
Évaluations - 2, GPA: 3.5 ( )

Instructions Bionaire, Modèle BFH3410

Fabricant : Bionaire
Taille : 140.57 kb
Nom Fichier :
Langue d'enseignement: en
Aller à la télécharger



Facilité d'utilisation


The POWER light will remain lit while the heater is in operation. Figure 1 BFH3420 Shown FOR HEATING OPERATION On first use the heater will operate in fan mode. After initial use the heater will operate on the last programmed setting. BFH3405 Figure 2 Power Button BFH3410/BFH3420 Mode Button Power Light Oscillation Button Nightlight Button 1. By pressing the MODE button (or turning the MODE knob for BFH3405), select FAN, LOW HIGH or AUTO (LOW for 750 Watts and HIGH for 1500 Watts). THERMOSTAT INSTRUCTIONS This function allows you to set the heater to your desired comfort level. The heater will maintain the desired room temperature. For BFH3405: 1. Set the THERMOSTAT knob to the highest setting, clockwise as far as it will turn. 2. When the desired room temperature level is reached, lower the thermostat setting, by turning the THERMOSTAT knob counter clockwise until it clicks. The heater will now stop operating. 3. The thermostat will now automatically maintain the pre-set temperature level by turning the heater on and off. The thermostat is now set. For BFH3410 and BFH3420: 1. To change the heater settings, press the MODE button. Each time you press the MODE button it will scroll to the settings FAN, LOW, HIGH, or AUTO. 2. Select the AUTO mode. 3. Set the heater to the desired room temperature by pressing the (+) or (-) buttons. The thermostat is now set. Note that the degree range is from 60°F - 85°F (15°C - 29°C). if you scroll past 85°F (29°C) the display will automatically loop to 60°F (15°C). NOTE: When the room temperature goes below the set temperature the heater will automatically turn off. The fan will continue to run, cooling the heater for 30 seconds. The unit will now operate when the room temperature falls below the preset temperature. . TIP: It is normal for the heater to cycle ON and OFF as it maintains the present temperature. To prevent the unit from cycling, raise the thermostat setting. OSCILLATION (For model BFH3420 only) For maximum heat distribution use the oscillation function. 1. Press the Oscillation button on the control panel to begin 90° oscillation. 2. To stop the heater from oscillating, press the Oscillation button a second time; the unit will stop in that direction. To resume oscillation, press the Oscillation button again. NIGHTLIGHT (For BFH3410 and BFH3420 only) 1. The nightlight will automatically light when the room becomes dark. When the room becomes light, the nightlight will automatically turn off. 2. To turn the nightlight off, press the button on the control panel. . TIP: The nightlight will not automatically operate until the button is pressed again. MAINTENANCE INSTRUCTIONS During Season Care Before cleaning make sure the unit is unplugged. 1. Allow the heater to cool before cleaning. 2. Carefully wipe the unit with a soft, damp cloth. . TIP: Over time, dust may accumulate on the front grills. This can be removed by wiping the unit with a damp cloth. Always unplug unit and allow to cool prior to cleaning. TROUBLESHOOTING . If your heater fails to operate: . Make sure the electrical outlet or circuit breaker is work...

Ce manuel est également adapté pour les modèles :
déshumidificateurs - BFH3405 (140.57 kb)
déshumidificateurs - BFH3420 (140.57 kb)

Écrivez votre propre critique du dispositif



Texte du message
Votre nom :
Entrez les deux chiffres :
capcha





catégories