Évaluations - 2, GPA: 4 ( )

Fabricant : Asus Taille : 3.58 mb Nom Fichier : Langue d'enseignement:

You can then use the USB recovery disk to recover the system of your Eee Slate. • The USB storage device should be more than 16GB. • Memory cards are not supported for this function. • The computer that you use to create the USB recovery disk must be installed with either Windows® 7 or Vista OS. To create the USB recovery disk: 1. Using a computer with Windows Vista/7 OS, connect the USB storage device to the computer’s USB port. 2. Place the Recovery DVD into the optical drive. The make recovery disk screen appears. An alert message appears if you have not connected a USB storage device to the computer. 3. Locate the USB storage device where you want to copy the system recovery files. All data in your USB storage device will be lost during the copying process. Ensure that you back up all your data before creating the USB recovery disk. 4. Follow the onscreen instructions to complete creating the USB recovery disk. To use the USB recovery disk: 1. Connect the USB recovery disk to your Eee Slate, and then turn on your Eee Slate. The system recovery screen appears. 2. Follow the onscreen instructions to complete the recovery process. ASUS Eee Slate Chapter 3: Using the Eee Slate Eee Slate Folio Bluetooth Keyboard Refill Nibs and Nib Remover 4 Accessories Eee Slate Folio Your device comes with the durable Eee Slate folio for easy storage and to protect your device from scratches and dents. To store your device with the Eee Slate folio: 1. Open the Eee Slate folio. 2. Follow the steps below to place your device into the Eee Slate folio. 1 2 Chapter 4: Accessories To use the Eee Slate folio: ASUS Eee Slate Bluetooth Keyboard To install the batteries to the bluetooth keyboard: 1 2 3 4 To power on the bluetooth keyboard: Chapter 4: Accessories Refill Nibs and Nib Remover To replace the digitizer pen nib with the nib remover: 1 2 ASUS Eee Slate Chapter 4: Accessories Declarations and Safety Statements Copyright Information Limitation of Liability Service and Support A Appendix Declarations and Safety Statements Federal Communications Commission Statement This device complies with FCC Rules Part 15. Operation is subject to the following two conditions: • This device may not cause harmful interference, and • This device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a class B digital device, pursuant to Part 15 of the Federal Communications Commission (FCC) rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help. The use of a shielded-type power cord is required in order to meet FCC emission limits and to prevent interference to the nearby radio and television reception. It is essential that only the supplied power cord be used. Use only shielded cables to connect I/O devices to this equipment. You are cautioned that changes or modifications not expressly approved by the party responsible for compliance could void your authority to operate the equipment. A-2 Appendix (Reprinted from the Code of Federal Regulations #47, part 15.193, 1993. Washington DC: Office of the Federal Register, National Archives and Records Administration, U.S. Government Printing Office.) FCC Radio Frequency (RF) Exposure Caution Statement Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment. “The manufacture declares that this device is limited to Channels 1 through 11 in the 2.4GHz frequency by specified firmware controlled in the USA.” This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. To maintain compliance with FCC RF exposure compliance requirements, please avoid direct contact to the transmitting antenna during transmitting. End users must follow the specific operating instructions for satisfying RF exposure compliance. ASUS Eee Slate Declaration of Conformity (R&TTE directive 1999/5/EC) The following items were completed and are considered relevant and sufficient: • Essential requirements as in [Arti...

Téléchargez votre

Pour télécharger, entrez 2 chiffres :