Évaluations - 4, GPA: 4.3
(
)
)
|
Facilité d'utilisation
3.) Turn the TUNING control to find the desired station. PROGRAM REPEAT RANDOM POWER FM ST. The FM ST. indicator light comes ‘On’If you PM tune to a FM Stereo station, . AL. 1 AL. 2 4.) Adjust the VOLUME control to the desired level. 5.) When you are finished listening press the POWER button to turn the unit ‘Off’. PROGRAM REPEAT RANDOM POWER FM ST. The POWER indicator goes ‘Off’. PM AL. 1 AL. 2 11 CKD1137_053105.p65 11 1/6/2005, 14:22 Antenna Information AM The AM ferrite bar antenna is inside the cabinet. If AM reception is unsatisfactory try turning the entire unit slightly until you find the direction that provides the best reception for the desired station. FM Make sure the FM lead wire antenna is extended to it’s full length. You may have to vary the direction of the wire antenna to find the position that provides the best reception. 12 CKD1137_053105.p65 12 1/6/2005, 14:22 13 Playing Compact Discs Note: Although this CD player can read CD-R and CD-RW discs, in addition to normal CDs, however the playability of CD-R/RW discs may be affected by the type of software that was used to create the discs, as well as the quality and condition of the blank media you are using. 100% playability cannot be guaranteed. This is not an indication of a problem with the player. Normal Playback 1.) Press the POWER button to switch the unit ‘On’. The POWER indicator comes ‘On’. 2.) Set the FUNCTION selector to the CD position. 3.) Lift the tab on side of CD door to open the CD door. 4.) Place your disc on the center spindle with the printed label side facing up. Press down near the center of the disc to make sure it is firmly ‘seated’on the spindle, close the CD door. CKD1137_053105.p65 13 1/6/2005, 14:22 5.) Two dashes “– –”flash while the player reads PROGRAM REPEAT RANDOM POWER FM ST. the table of contents of the disc. PM AL. 1 The display will show the total number of tracks for a few seconds and then return to the correct time. AL. 2 PROGRAM REPEAT RANDOM POWER FM ST. PROGRAM REPEAT RANDOM POWER FM ST. AL. 2AL. 1 PM AL. 2AL. 1 PM Note: If the disc is inserted incorrectly, or if the disc is badly scratched and cannot be read by the player, “no”will PROGRAM REPEAT RANDOM POWER FM ST. appear on the display for a few seconds, and then the display returns to the correct time. 6.) Press the PLAY/PAUSE button to begin playback. AL. 2 PM PROGRAM REPEAT RANDOM POWER FM ST. The display will briefly show “0 1”(Track 1) PM and playback on track 01 begins. AL. 1 AL. 2 After a few seconds the display returns to the correct time. 7.) To Pause briefly during playback press the PLAY/PAUSE button. The track number flashes briefly and the PROGRAM REPEAT RANDOM POWER FM ST. sound stops, but the disc continues to spin. PM AL. 1 Press PLAY/PAUSE button again to cancel pause and resume playback. 8.) To skip forward or backward to other tracks repeatedly press the or buttons until the desired track number appears in the display. Playback will begin on the selected track. AL. 2 14 CKD1137_053105.p65 14 1/6/2005, 14:22 9.) To stop playback at any time press the STOP/TIME button. After the last track has played the disc stops automatically. Lift the tab on side of CD door to open the CD door and remove your disc. To Start Playback From A Specific Track Load your disc and wait until the display shows the total number of tracks. Press the or buttons to select the desired track. PROGRAM REPEAT RANDOM POWER FM ST. PM While the selected track number is still flashing press the PLAY/PAUSE button. AL. 1 AL. 2 Playback will begin on the selected track and continue until the end of the disc. High Speed Music Search You can search rapidly forward or backward within a track to locate a specific musical passage. Depress and hold the or buttons to begin high speed search. The display will show the current track and the player moves rapidly forward or backward. When you reach the desired passage release the or button and normal playback resumes. Note: The volume level is automatically reduced during high speed music search. Random Playback To listen to the tracks on a disc in random order: 1.) Load your disc and wait until the total track number is displayed. PROGRAM REPEAT RANDOM POWER FM ST. 2.) Press the P.MODE button three times. PM AL. 1 The RANDOM indicator comes ‘On’. AL. 2 3.) Press the PLAY/PAUSE button. The player will select a track at random and playback begins on that track. The selected track number appears in the display for a few seconds. After each track has played once the player stops automatically. To cancel random playback at any time, press the P.MODE button until RANDOM indicator goes ‘Off’. 15 CKD1137_053105.p65 15 1/6/2005, 14:22 Repeat Playback You can program the player to repeat a single track or the entire disc continuously. One Track Repeat 1.) Load your disc and wait until the total track number is displayed. PROGRAM REPEAT RANDOM POWER FM ST. 2.) Press the P.MODE button once. PM The REPEAT indicator flashes. AL. 1 AL. 2 3.)...