Évaluations - 1, GPA: 3
(
)
)
|
Facilité d'utilisation
The procedure for storing stations in memory is as follows: 1.) Follow step 3 under “LISTENING TO THE RADIO” in page 10 to select the first station you wish to memorize. Example FM 103.50 MHz. 2.) When the desired station appears on the display press the PROG/MEMORY button inside the cassette key cover. The Preset # “01” indicator flashes and the “MEMORY” indicator appears in the display. MHz MHz 3.) Press the PRESET << / >> buttons inside the cassette key cover to select a preset channel number. (Example: Preset channel # 03.) 4.) Press the PROG/MEMORY button once more to enter the station in preset memory # 03. MHz 5.) Repeat steps 1 through 4, selecting a different preset number in Step 3 each time until you have entered up to 10 FM stations in the tuner memory. 6.) Press the BAND button to select the AM band and follow the same procedure to enter up to 10 AM stations in the tuner memory. 12 PD6850_ib060203.p65 12 2/6/2003, 14:41 RECALLING PRESET STATIONS Press the POWER button to turn the unit ‘On’ and select the desired band. Press the PRESET << / >> buttons inside the cassette key cover repeatedly to scroll through the preset memories until the display shows the desired station. CHANGING PRESET STATIONS To change any preset station memory select the desired band and tune to the new station you wish to memorize. Press the PROG/MEMORY button and then press the PRESET << / >> buttons to display the memory number you wish to change. Press the PROG/MEMORY button again to enter the new station in the memory. The new station is memorized and the previous station is deleted from the memory. 13 PD6850_ib060203.p65 13 2/6/2003, 14:41 PLAYING COMPACT DISCS IMPORTANT: This CD player can play normal CDs plus CD Recordable (CD-R) and CD Rewriteable (CD-RW) discs. However the playability of CD-R and CD-RW discs may be affected by the type of software that was used in ‘ripping’ the tracks from the original discs and ‘burning’ the tracks onto the blank media. Playability may also be affected by the quality and condition of the blank media you use for recording. 100% compatibility cannot be guaranteed. This is not an indication of any problems with your player. 1.) Press the POWER button to turn the unit ‘On’. 2.) Press the FUNCTION button on right side panel to select the CD function. 3.) Press the OPEN/CLOSE position on the CD door to open the CD door. The main display shows “OPEN”. If you have not already done so, remove the ‘dummy CD’ from the player and discard it. 4.) Place a CD on the center spindle with the printed label side facing upward. 5.) Close the CD door. The disc will spin and ‘00:0000’ will flash in the display as the player reads the table of contents on the disc. Within a few seconds the disc will stop spinning and the display will show the total playing time and total tracks on the disc. Note: If the disc is inserted upside down or if the disc is badly scratched and unreadable, playback will not be possible. In this case the main display will show “no dISC”. Remove the disc and re insert it properly, or try another disc. 14 PD6850_ib060203.p65 14 2/6/2003, 14:41 6.) Press the PLAY/PAUSE button on the top panel to begin playback on track 1. The display will show the elapsed playing time of each track as it plays. 7.) Adjust the VOLUME and SURROUND controls as desired. 8.) When the last track has played the player stops automatically and the display again shows the total playing time and tracks on the disc. You may also stop playback at any time by pressing the STOP button on the top panel. 9.) When you are finished listening press the OPEN/CLOSE position to open the CD door and remove the disc. 10.)Press the POWER button to turn the unit “Off”. PAUSE CONTROL To pause momentarily during CD playback press the PLAY/PAUSE button on the top panel again. The sound stops and the elapsed time display flashes, but the disc continues to spin. Press the PLAY/PAUSE button once more to cancel Pause mode and resume playback. The elapsed time display stops flashing. 15 PD6850_ib060203.p65 15 2/6/2003, 14:41 SKIP/SEARCH ( / ) CONTROLS To skip to higher or lower numbered tracks during playback repeatedly press the SKIP / buttons on the top panel until the desired track number appears in the display. Playback will begin on the desired track. To perform high speed search within a track to locate a specific musical passage depress and hold the SKIP / buttons. The player will move rapidly forward or backward as long as the buttons are depressed. When you hear the desired passage release the buttons and normal playback will resume at that point. TO START PLAYBACK ON A SPECIFIC TRACK Load the disc as usual and wait until the total playing time and track numbers appear on the display. Press the SKIP / buttons on the top panel until the desired track number appears in the display, then press the PLAY/PAUSE button to begin playback on that track. 16 PD6850_ib060203.p65 16 2/6/2003, 14:41 REPEAT PLAYBACK You can program the p...