Évaluations - 4, GPA: 4.3
(
)
)
|
Facilité d'utilisation
Refer all servicing to qualified service personnel. C OM PA C T DIGITAL AUDIO CX-CD241 Portable CD Player with AM/FM Stereo Tuner INSTRUCTION MANUAL Please read this manual before connection and use. Page SAFETY INFORMATION IMPORTANT SAFEGUARDS TABLE OF CONTENTS INDEX TO THE PARTS AND CONTROLS.................................................................................1 POWER SUPPLY/CONNECTING TO A HEADPHONE.............................................................2 CD OPERATION/RADIO OPERATION.......................................................................................3 CARES OF DISC/SPECIFICATION........................................................................................... ..4 TROUBLE SHOOTING.................................................................................................................5 RANDOM Frequency Dial REAR VIEW LED Panel Tuning Control Volume Control FM ST. REPEAT POWER PLAY AC Socket PLAY/PAUSE/STOP 1. Press the PLAY/PAUSE button once to start playing. The current playing track number appears on the LED panel. The "PLAY" LED indicator is lit during playback. 2. Press the PLAY/PAUSE button twice to stop playing temporarily during playback. The current track number is flashing while pausing. 3. Press the PLAY/PAUSE button again to resume normal playback. 4. Press the STOP button to stop playing. NOTE: To remove disc from CD player, always press STOP and wait for complete stop. REPEAT mode 1. Press the REPEAT button once to repeat playing the current track only, and the REPEAT LED keeps ON. 2. Press the REPEAT button twice to repeat all tracks, and the REPEAT LED will be flashing. 3. Press the REPEAT button once more to quit the REPEAT mode. TRACKING mode 1. To go back to the beginning of current track, press the button once. 2. To go back to the previous tracks, press the button repeatedly. 3. To go to the next track, press the button once or repeatedly to play your desired track. RANDOM PLAY 1. Press the RANDOM button once to start playing the disc in a random order. The segments of the " " on the LED window will also be lit in a random order. 2. To cancel the random play, press the RANDOM button again. PROGRAM PLAY 1. Press the PROGRAM button at stop mode. The "PLAY" LED will be flashing. 2. Press the or button to select the desired track number, and then press PROGRAM to confirm. 3. Repeat step 2 to set up to 15 tracks. (The programmed # shown on LED is from "1" to "9" and "A" to "F"). 4. Press the PLAY/PAUSE button to start playing the programmed tracks. 5. To cancel the program play, press the STOP button. 1. Slide the Function Selector switch to radio. 2. Select AM, FM or FM ST by sliding the Band Selector switch to corresponding position. FM ST is for FM stereo reception. The "FM ST" LED indicator will be lit as receiving a FM radio station. 3. Tune the desired station by turning the Tuning Control. 4. Adjust the volume with Volume Control as desired. 5. Extend Telescopic Antenna and adjust the direction and angle to obtain the optimum reception. 6. Set the Function Switch to the OFF position to stop radio. Radio Operation Specification Power Supply: 110V~60Hz/220V~50Hz dual voltage Applicable disc: CD/CD-R Power Consumption: 4.2W Output Power: 1W x2 Speaker: 8 OHM Dimensions: 210(L) x143.5 (H) x220 (W) mm (main unit) Weight: 1650g (main unit) RADIO Frequency Range: AM: 530KHz - 1700KHz FM: 88MHz - 108MHz CD Player Laser Wavelength: 760 ~ 800 nm Tracking Method: 3-spot error detection/3.86 mm lens Design and specifications are subject to change without notice. Slide the Function Selector to the CD position and insert a CD disc. 4. To fast backward/fast forward through the disc, press and hold the / button. .2. Power Supply 1. Using AC power Before connecting the AC power cord, please make sure to select the proper power supply between 110V and 220V with the Power Selector on the bottom of the unit. Insert one end of the AC power cord into the AC socket on the rear of the unit and the other end into a standard wall socket. 2. Using batteries Insert 6 x "C" size batteries (not included) in the battery compartment on the bottom of the unit by matching the polarities. The unit will not operate on battery power when the AC power cord is plugged into the AC socket. Replace batteries when the power indicator dims, the volume decreases or the sound distorts. Use batteries of high quality and check them regularly. Alkaline batteries are recommended. Do not mix new batteries with old or used batteries. Use only batteries of the same brand and type. Batteries should not be left in the unit if they are exhausted or if the unit is not to be used for a long period of time as they may leak and damage the unit. Battery leakage is not covered under the warranty. You can use headphones with 3.5mm diameter stereo plug and an impedance of 32 Ohms. When the headphones are connected, the speakers are disconnected automatically. Set the VOLUME to a low level before u...