Évaluations - 2, GPA: 3.5
(
)
)
|
Facilité d'utilisation
Most installations can be accomplished with common tools and procedures. However, you should be familiar with and comfortable working on your vehicle. If you do not feel comfortable performing this installation, it is recommended to have the installation completed by a qualified mechanic. If you have any questions, please call our Technical Hotline at: 1-800-416-8628, 7:00 am - 5:00 pm, Monday through Friday, Pacific Standard Time. IMPORTANT NOTE: Proper installation is the responsibility of the installer. Improper installation will void your warranty and may result in poor performance and engine or vehicle damage. DESCRIPTION: Edelbrock Fuel Pumps are for high performance street or street/strip use where there is a demand for high volume fuel delivery. These pumps are compatible with GASOLINE FUELS ONLY. They have been thoroughly tested and proven to have flow capacity significantly greater than other popular mechanical fuel pumps used for street and street/strip applications. Edelbrock 110/130 Fuel Pumps fit the following applications: 110 FUEL PUMPS 130 FUEL PUMPS AMC V8...........................................................................#1716 Small-Block Chevrolet.....................................................#1711 Small-Block Chevrolet.....................................................#1721 Big-Block Chevrolet.........................................................#1712 Big-Block Chevrolet.........................................................#1722 289-352W Ford...............................................................#1715 Small-Block Chrysler.......................................................#1720 429/460 Ford..................................................................#1718 Big-Block Chrysler ..........................................................#1723 289-351W Ford...............................................................#1725 390-428 FE Ford.............................................................#1724 429/460 Ford..................................................................#1726 Pontiac V8.......................................................................#1713 INSTALLATION PROCEDURE NOTE: Installation of the mechanical fuel pump is the same as for OEM pumps. If uncertain of the procedure to follow for your particular vehicle, consult the appropriate repair manual for your model vehicle. Note that the fuel inlet and outlet of the Edelbrock Street Performance Fuel Pump is much bigger than original equipment (3/8” NPT). See next page for instructions on re-positioning the pump body for fuel line clearance. IMPORTANT NOTES: • Pump inlet and outlet ports are tapped to 3/8” NPT. • For off-road or race applications, we recommend the use of a dust-shield between fuel pump and the nearest wheel, to prevent dirt or debris from plugging the pump vent hole. • 110 GPH Fuel Pump output fuel pressure is set at 6 psi. An external fuel pressure regulator is NOT REQUIRED in most cases. • 130 GPH Fuel Pump output fuel pressure is set at 10 psi. An external fuel pressure regulator IS REQUIRED in most cases. Edelbrock recommends the use of our regulators # 1727, or 8192. See our catalog or website for more details. • On some 351-W Ford engines there may be casting flash on the front cover which will interfere with proper seating of your new fuel pump. F...
Ce manuel est également adapté pour les modèles :Lecteurs - 130 (474.17 kb)