Évaluations - 3, GPA: 4.3 ( )

Fabricant : Philips Taille : 420.49 kb Nom Fichier : ab3cbce3-80bc-43d8-99a2-38bd9635d2f3.pdf Langue d'enseignement:

2 Press 2; to start CD play. yPlayback starts with the selected track. Searching for a passage during playback 1 Keep . or §pressed to find a particular passage in a backward or forward direction. ySearching starts while playback continues at low volume. After 2 seconds the search speeds up. 2 Release the button when you reach the desired passage. yPlayback continues from this position. Notes: – If the player is in SCAN mode (see MODE chapter), searching is not possible. – In shuffle, shuffle repeat all or repeat mode (see MODE chapter), or while playing a program, searching is only possible within the particular track. 4 4 9 Selecting a track and searching FEATURES Programming track numbers You can store up to 30 tracks to play in a program. A single track may be stored more than once in the program. 1 While playback is stopped, select a track with . or §. 2 Press PROG to store the track. yPROG lights up; the track number programmed and P with the total number of stored tracks are displayed. 4 ESP PROG 3 Select and store all desired tracks in this way. 4 Press 2; to start playback of your selected tracks. yPROG is shown and playback starts. •You can review the program by pressing PROG for more than 2 seconds. yThe display shows all the stored tracks in sequence. Notes: – If you press PROG and there is no track selected, SELECt is displayed. ESP – If you try to store more than 30 tracks, FULL is displayed. Clearing the program • While playback is stopped, press 9 to clear program. yCLEAr is displayed once, PROG goes off, and the program is cleared. ESP PROG Note: The program will also be cleared if the power supply is interrupted, or if the CD-player lid is opened, or if the set switches off automatically. Selecting different playing possibilities-MODE It is possible to play tracks in random order, to repeat a single track or the entire CD, and to play the first few seconds of each track. 1 Press MODE during playback as often as required in order to activate one of the following ‘modes’. The active mode is shown in the display. ySHUFFLE : All tracks of the CD are played in random order until all of them have been played once. ySHUFFLE REPEAT ALL : All tracks of the CD are played repeatedly in random order. yREPEAT : The current track is played repeatedly. yREPEAT ALL : The entire CD is played repeatedly. ESP SHUFFLE REPEAT ALL y SCAN: The first 10 seconds of each of the remaining tracks are played in sequence. 2 Playback starts in the chosen mode after 2 seconds. •To return to normal playback, press MODE repeatedly until the display shows no active modes. ESP With a conventional portable CD-player you might have experienced that the music stopped e.g. when you were jogging. The Electronic Skip Protection prevents loss of sound caused by light vibrations and shocks. Continuous playback is ensured. However ESP does not prevent playback interruptions during vigorous running. It also does not protect the unit against any damage caused by dropping! In this set ESP is default ON. It is possible to set ESP off. •Press MODE for more than 2 seconds. y ESP disappears. •Press MODE again for more than 2 seconds. y ESP is displayed. ESP on . ESP off . ESP on FEATURES / TROUBLESHOOTING RESUME and HOLD You can interrupt playback and continue (even after an extended period of time) from the position where playback stopped (RESUME) and you can lock all buttons of the set so that no action will be executed (HOLD). Use the RESUME–HOLD–OFF slider for these functions. RESUME – continuing from where you have stopped 1 Switch the slider to RESUME during playback to acti vate RESUME. yRESUME is shown. ESP RESUME E F F •RSUME• HOLD O U T L I N E / 2 Press 9 whenever you want to stop playback. 3 Press 2; whenever you want to resume playback. yRESUME is shown and playback continues from where you have stopped. •To deactivate RESUME, switch the slider to OFF. yRESUME goes off. HOLD – locking all buttons You can lock the buttons of the set by switching the slider to HOLD. Now, when a key is pressed, no action will be executed. This is of use, for example, when transporting the player in a bag. With HOLD activated, you can avoid accidental activation of other functions. 1 Switch the slider to HOLD to activate HOLD. yAll buttons are locked. HoLd is shown when you press any button. If the set is switched off, ESP HOLD HOLD will be shown only when 2; is pressed. 2 To deactivate HOLD, switch the slider to OFF. Note: If you deactivate HOLD by switching the slider to RESUME, you will be activating the RESUME function. Troubleshooting WARNING: Under no circumstances should you try to repair the set yourself as this will invalidate the warranty. If a fault occurs, first check the points listed, before taking the unit for repair. If you are unable to solve a problem by following these hints, consult your dealer or service center. The CD player has no power, or playback does not start • Check that your batteries are not dead or empty, that they a...

Téléchargez votre

Pour télécharger, entrez 2 chiffres :