Évaluations - 3, GPA: 4.7
(
)
)
|
Photos et spécifications Philips DC190 |
Facilité d'utilisation
Switch to standby 1 Press again to switch the unit to standby mode. » The clock (if set) appears on the display panel. Adjust volume 1 During play, press VOL +/- to increase/decrease the volume. 4 Play Play from iPod You can enjoy audio from iPod through this unit. Compatible iPod Apple iPod models with a 30-pin dock connector: • iPod classic, iPod touch, iPod nano, iPod 5th generation (video), iPod with color display, iPod mini. Load the iPod 1 Push to open the dock compartment. 2 Place the iPod in the dock. Remove the iPod 1 Pull the iPod out of the dock. Listen to the iPod 1 Ensure that the iPod is loaded correctly. 2 Press SOURCE repeatedly to select iPod source. » The connected iPod plays automatically. • To pause/resume play, press . • To skip to a track, press / . • To search during play, press and hold / , then release to resume normal play. Charge the iPod When the unit is connected to power, the docked iPod begins to charge. Play from an external device You can also listen to an external audio device through this unit. 1 Press SOURCE repeatedly to select MP3 link source. 2 Connect the supplied MP3 link cable to: • the MP3-LINK jack (3.5mm) on the back of the unit. • the headphone jack on an external device. 3 Start to play the device (see the device user manual). 5 Listen to radio Note • Only FM radio reception is available on this unit. Tune to a radio station Tip • Position the antenna as far as possible from TV, VCR or other radiation source. • For optimal reception, fully extend and adjust the position of the antenna. 1 Press SOURCE repeatedly to select FM tuner. 2 Press and hold TUNING +/- for more than 2 seconds. » The radio tunes to a station with strong reception automatically. 3 Repeat step 2 to tune to more stations. • To tune to a weak station, press TUNING +/-repeatedly until you find optimal reception. Program radio stations automatically You can program a maximum of 20 preset radio stations. 1 In the tuner mode, press and hold TIME SET/AUTO SCAN for more than 2 seconds to activate automatic program mode. » All available stations are programmed in the order of waveband reception strength. » The first programmed radio station is broadcast automatically. Program radio stations manually You can program a maximum of 20 preset radio stations. 1 Tune to a radio station. 2 Press TIME SET/AUTO SCAN to activate the program mode. » The preset number begins to blink. 3 Press PRESET +/- to select a number. 4 Press TIME SET/AUTO SCAN to confirm. 5 Repeat the above steps to program other stations. Note • To overwrite a programmed station, store another station in its place. Select a preset radio station 1 Press PRESET +/- to select a preset number. 6 Other features Set the alarm timer You can set two alarms which go off at different time. 1 Ensure that you have set the clock correctly. 2 Press and hold ALARM 1 or ALARM 2 for 2 seconds. » or and hour digits begin to blink. 3 Press TUNING +/- repeatedly to set the hour. 4 Press ALARM 1 or ALARM 2 to confirm. » or and minute digits begin to blink. 5 Repeat steps 3-4 to set the minute. 6 Repeat steps 3-4 to select whether to ring alarm on weekdays or at weekend. » “L XX(volume level)” begins to blink. 7 Repeat steps 3-4 to set the maximum alarm volume. Set alarm mode 1 Adjust the WAKE TO iPod/RADIO/BUZZ control to select the source for the alarm. » When the alarm time comes, the selected iPod, radio or buzzer turns on. Tip • If iPod source is selected but no iPod is loaded, the buzzer is selected automatically. Activate and deactivate the alarm timer 1 Press ALARM 1 or ALARM 2 repeatedly to activate the timer. »If the timer is activated, or is displayed. • To deactivate the alarm time, press ALARM 1 or ALARM 2 repeatedly until is displayed. »If the timer is deactivated, or disappears. Repeat alarm 1 When the alarm rings, press REPEAT ALARM/BRIGHTNESS CONTROL. » The alarm repeats ringing minutes later. Tip • You can press TUNING+/- to adjust interval to repeat alarm. Stop alarm ring 1 When the alarm rings, press the corresponding ALARM 1or ALARM 2. » The alarm stops but the alarm settings remain. View the alarm settings Press ALARM 1orALARM 2. Set the sleep timer This unit can switch to standby automatically after a set period of time. 1 Press SLEEP repeatedly to select a set period of time (in minutes). » When the sleep timer is activated, the display shows . Tip • When the sleep timer is activated, the volume will gradually decrease. To deactivate sleep timer 1 Press SLEEP repeatedly until [OFF] (off) is displayed. »When the sleep timer is deactivated, disappears on the display. Adjust display brightness 1 Press BRIGHTNESS CONTROL repeatedly to select different levels of display brightness. 7 Product information Note • Product information is subject to change without prior notice. Specifications Amplifier Rated Output Power Signal to Noise Ratio MP3 Link 2X1.5 W RMS >55 dB 0.6 V RMS 10 kohm Tuner FM Tuning Range Tuning grid Sensitivity - Mono, 26dB S/...
Ce manuel est également adapté pour les modèles :Haut-parleurs - DC190/93 (806.56 kb)