Évaluations - 3, GPA: 4.3
(
)
)
|
Facilité d'utilisation
4 Maximum Pre-Output Voltage 2 V/10 k ohms Bass ±14 dB at 60 Hz Treble ±14 dB at 10 kHz Weight 1.5 kg (3 lbs. 4 oz) CHASSIS SIZE Width 178 mm (7") Height 50 mm (2") Depth 161 mm (6-3/8") NOSEPIECE SIZE Width CDE-9874 Series CDE-9872 Series 170 mm (6-3/4") 170 mm (6-3/4") Height CDE-9874 Series CDE-9872 Series 46 mm (1-13/16") 46 mm (1-13/16") Depth CDE-9874 Series CDE-9872 Series 25 mm (1") 18 mm (11/16") •Due to continuous product improvement, specifications and design are subject to change without notice. CAUTION CLASS 1LASER PRODUCT(Bottom side of player) Installation and Connections Before installing or connecting the unit, please read the following and pages 3 to 5 of this manual thoroughly for proper use. Warning MAKE THE CORRECT CONNECTIONS. Failure to make the proper connections may result in fire or product damage. USE ONLY IN CARS WITH A 12 VOLT NEGATIVE GROUND. (Check with your dealer if you are not sure.) Failure to do so may result in fire, etc. BEFORE WIRING, DISCONNECT THE CABLE FROM THE NEGATIVE BATTERY TERMINAL. Failure to do so may result in electric shock or injury due to electrical shorts. DO NOT SPLICE INTO ELECTRICAL CABLES. Never cut away cable insulation to supply power to other equipment. Doing so will exceed the current carrying capacity of the wire and result in fire or electric shock. DO NOT DAMAGE PIPE OR WIRING WHEN DRILLING HOLES. When drilling holes in the chassis for installation, take precautions so as not to contact, damage or obstruct pipes, fuel lines, tanks or electrical wiring. Failure to take such precautions may result in fire. DO NOT USE BOLTS OR NUTS IN THE BRAKE OR STEERING SYSTEMS TO MAKE GROUND CONNECTIONS. Bolts or nuts used for the brake or steering systems (or any other safety-related system), or tanks should NEVER be used for installations or ground connections. Using such parts could disable control of the vehicle and cause fire etc. KEEP SMALL OBJECTS SUCH AS BATTERIES OUT OF THE REACH OF CHILDREN. Swallowing them may result in serious injury. If swallowed, consult a physician immediately. DO NOT INSTALL IN LOCATIONS WHICH MIGHT HINDER VEHICLE OPERATION, SUCH AS THE STEERING WHEEL OR SHIFT LEVER. Doing so may obstruct forward vision or hamper movement etc. and results in serious accident. Caution HAVE THE WIRING AND INSTALLATION DONE BY EXPERTS. The wiring and installation of this unit requires special technical skill and experience. To ensure safety, always contact the dealer where you purchased this product to have the work done. USE SPECIFIED ACCESSORY PARTS AND INSTALL THEM SECURELY. Be sure to use only the specified accessory parts. Use of other than designated parts may damage this unit internally or may not securely install the unit in place. This may cause parts to become loose resulting in hazards or product failure. ARRANGE THE WIRING SO IT IS NOT CRIMPED OR PINCHED BY A SHARP METAL EDGE. Route the cables and wiring away from moving parts (like the seat rails) or sharp or pointed edges. This will prevent crimping and damage to the wiring. If wiring passes through a hole in metal, use a rubber grommet to prevent the wire’s insulation from being cut by the metal edge of the hole. DO NOT INSTALL IN LOCATIONS WITH HIGH MOISTURE OR DUST. Avoid installing the unit in locations with high incidence of moisture or dust. Moisture or dust that penetrates into this unit may result in product failure. Precautions •Be sure to disconnect the cable from the (–) battery post before installing your CDE-9874R/CDE-9874RR/CDE-9874RB/ CDE-9872R/CDE-9872RM/CDE-9872RE. This will reduce any chance of damage to the unit in case of a short-circuit. •Be sure to connect the colour coded leads according to the diagram. Incorrect connections may cause the unit to malfunction or damage to the vehicle’s electrical system. •When making connections to the vehicle’s electrical system, be aware of the factory installed components (e.g. on-board computer). Do not tap into these leads to provide power for this unit. When connecting the CDE-9874R/CDE-9874RR/CDE-9874RB/CDE-9872R/ CDE-9872RM/CDE-9872RE to the fuse box, make sure the fuse for the intended circuit of the CDE-9874R/CDE-9874RR/CDE-9874RB/ CDE-9872R/CDE-9872RM/CDE-9872RE has the appropriate amperage. Failure to do so may result in damage to the unit and/or the vehicle. When in doubt, consult your Alpine dealer. •The CDE-9874R/CDE-9874RR/CDE-9874RB/CDE-9872R/ CDE-9872RM/CDE-9872RE uses female RCA-type jacks for connection to other units (e.g. amplifier) having RCA connectors. You may need an adaptor to connect other units. If so, please contact your authorized Alpine dealer for assistance. •Be sure to connect the speaker (–) leads to the speaker (–) terminal. Never connect left and right channel speaker cables to each other or to the vehicle body. IMPORTANT Please record the serial number of your unit in the space provided below and keep it as a permanent record. The serial number or the engraved serial number is located on th...
Ce manuel est également adapté pour les modèles :Lecteurs - CDE-9874RB (1010.71 kb)
Lecteurs - CDE-9874R (1010.71 kb)
Lecteurs - CDE-9872RM (1010.71 kb)
Lecteurs - CDE-9872RE (1010.71 kb)