Évaluations - 2, GPA: 4 ( )

Fabricant : RCA Taille : 210.86 kb Nom Fichier : RP2461_2_3_7_889UEN.pdf Langue d'enseignement:

Refer to the table for details of the operating voltage. AC/DC adaptor is purposed for indoor use in dry rooms only. Remove the jack from the device to use it with the batteries. Note : Power is fed to the unit even when it is not functioning. To cut the power supply off, the AC/DC adaptor must be unplugged. Car (DC) Power Supply Adaptor (For RP2467 only) Plug the car (DC) power supply adaptor into the DC in 4.5V jack at the rear/side of the CD player & then into the cigarette lighter receptacle in your car Battery Power Supply Refer to the table for details of the batteries required to operate your unit. Recharge function (For LAD899U only) To charge Ni-Cd batteries: 1. Insert 2 rechargeable batteries into the battery compartment on the main unit. 2. Connect the main adaptor. 3. Press STOP on the unit to start recharging. An animated battery indica-tor will be displayed when recharging is in progress. Power Supply Model Number RP2461 / RP2462 / RP2463 / RP2467 LAD899U AC/DC Adaptor 5-4079B (not included) Required Rating: Input: 120VAC 60Hz 6.0W Output: 4.5VDC @ 600mA A30460B (Included) (230V 50Hz) Batteries AAx2 (Not Included) 2 x 1.5V IEC R6 (UM3) (Included) AAx2 (Included) EN volume volume 180 second xtremeskipprotection. dynamic bass boost second track minute mod ba open dc4.5V line out CD-R / RW COMPATIBLE remote 2 3 4 5 6 7 8 913 4 1. contr buttons. 2. DC jack - Y of batteries for indoor use. 3. Line Out / Insert your headphones here. 4. volume 5. 6. 7. 8. Play/Pause button - Press to play or pause CD. Stop button- Press to stop CD play. (remote control only) - Plays and ends CD playback. - For random playback. og•display button - Enters program mode, or changes playback display. mode button - For repeat or introscan function. 14. Display Panel - More information on Page open switch - Slide to open CD door. 1 15 12 ON • • CONTROL HOLD 10 11 • on • hold controls rec 1 General Control 4 7 6 1 14 EN RP2461_12/31/11:46 Page 3 4 Skip /Search Press to skip to the previous track. Press and hold to search backwards in track. Press to skip to the next track. Press and hold to search forward in a track. Pause Press Play/Pause to turn on the unit for 45 sec ESP set- again to pause playback. The minutes and secondes flash when interrupted Stop Press Stop Play/Stop on the remote control during playback to end CD playback. Lock Slide control switch on the main unit to HOLD position to lock the button on the main unit to avoid accidental activation of unwanted functions. The hold icon will show on the dis-play when the controls are locked. Do the same to lock the buttons on the remote control. NOTE: Remember to slide the CONTROL switch to ON position to activate the controls again. Listening to a CD in your (For RP2467 only) 1. Select a power source (either battery power or the car DC adaptor) 2. Insert the cassette adaptor into the tape deck and plug the cord into the CD play-er’s HEADPHONES jack. 3 . Insert a compact disc and press Play/ Pause button to power on the unit (180 sec ESP). Press and hold while you press Play/Pause Adjust CD player’s volume to a mid level (make sure the Bass Boost is turned off). 4. Use the car stereo to adjust volume, tone . Adjust the volume of your CD player for better volume control. 5. Before ejecting the cassette after you have finished listening, make sure the car stereo’s volume is turned down. THE CD PLAYER EN THE DISPLAY 1. Random Playback 2. ESP• XTREME - 180 sec ESP ESP - 45 sec ESP 3. Is displayed when Bass Boost is ON. Press Bass Boost momentarily to toggle between Bass Boost 1, Bass Boost 2 and off. 4. Program mode 5. Repeat entire disc or repeat current track. 6. Is displayed when the control button is on HOLD position. 7 Battery Indicator. Listening to a Compact Slide the open switch to the right to open the door. Insert a disc and press lightly on the centre to lock. Close the door. Playback Press Play/ Pause button on the main unit or Play/Stop on the remote control to start playback. Rd DISC will appear in the display. Then, the total number of tracks and time of the CD will be displayed. If the disc com-partment is empty or the disc cannot be played, No Disc will appear in the display. The EXTREME SKIP PROTECTION* (EPS) system prevents sound interruptions when impacts or vibrations occur. Extreme skip protection consumes less power and increases the battery life. Therefore, the ESP function is always ON. After many successive impacts, the buffer might be emptied causing a brief sound interruption for the memory to reload. ESP•XTREME (180 seconds buffer) - Press Play/Pause on the main unit or Play/Stop on the remote control to power on the unit. The display will show ESP•XTREME. ESP (45 seconds buffer) - For better lis- tening quality, press og•display while pressing Play/Pause to turn the unit on. The display will show ESP. THE CD PLAYER bass boost 1P ESP•XTREME 1 3 4 5 6 2 7 EN RP2461_12/31/11:46 Page Skip /Search Press to skip to the previous track. Press and hol...

Téléchargez votre

Pour télécharger, entrez 2 chiffres :