Évaluations - 1, GPA: 3 ( )

Fabricant : Kenwood Taille : 1.53 mb Nom Fichier : Langue d'enseignement:

To cancel the sleep mode after setting it To exit from the sleep mode before the set time has elapsed, " is displayed, and then perform the operation in step 2 to select "OFF" . The sleep mode is also exited when the power is turned off Sound skip guard function (SHOCK GUARD)Sound skip guard function (SHOCK GUARD) The SHOCK optical pickup is "Wide CAPTURE" uses a method strong SHOCK GUARD function, so 1Press the MENU key repeatedly until " " is displayed. 2Press the 4key or 3/. key. . The SHOCK GUARD function cannot be used when the digital output jack of the unit is connected to another audio component. . When the SHOCK GUARD function is set to " S.G. Lo", continuous playback cannot be engaged. (Page 37) The mode changes each time the 4 or 3/. key is pressed. 1 "S.G. HI" : ( 96 seconds) Up to 96 seconds of music data is stored in the memory. 2 "S.G. Lo" : (24 seconds)* Up to 24 seconds of music data is stored in the memory. * There is no data compression, so that listening with high sound quality is possible. The SHOCK GUARD function is activated ("S.G. HI"(48 seconds)) permanently with the DPC-X637/ DPC-X537. Convenient functions Convenient functions The operating tones or canceled (deactivated). Press during playback 1Press and held the MENU key for more than 2Press the 4key or 3/. key. 2 seconds. The mode changes each time the 4 or 3/. key is pressed. 1 "bP on" : The operation tone (beep) is activated. 2 "bP OFF" : Cancel 37 DEUTSCH ITALIANO ESPANOL 3Press the 4 key or 3/. key. Setting continuous playback (only by remote control operation) When the disc is removed from the unit, playback of music can be continued using the data stored in the memory. This allows you to enjoy music even during replacement of the disc. Press during stop status. 1Press and held the MENU key for more than 2 seconds. 2Press the MENU key once. The mode changes each time the 4 or 3/. key is pressed. 1 "CP on" : Continuous playback is activated 2 "CP OFF" : Cancel . Continuous playback can be activated only when the SHOCK GUARD function is set to "S.G. HI". (DPC-X937 only) . Continuous playback function cannot be used when the digital output jack of the unit is connected to another audio component. (DPC-X937 only) When the continuous playback is set to "CP on" : . Even when you press the 7 key to open the top cover and change the disc, the current playback continues without interruption. (Pressing the 7 key one more time while the top cover is open stops the continued playback.) Playback can be continued till the top cover is closed and the 3/. is pressed. The continuous playback time is variable depending on the amount of music data stored in memory, etc. . To switch the power off, press the 7 key three times if the unit is presently in play mode or press the 7 key twice if the unit is in stop mode. 4Press the MENU key. 38 DEUTSCH ITALIANO ESPANOL Listening through the speakers on the recharger stand (DPC-X937/DPC-X637 only) Before using the recharger stand, be sure to read "Preparation of the recharger stand". (Page 12) 4Adjust the volume. 2Place the main unit on the recharger stand by aligning the triangular markings on them. 1Turn the main unit OFF. . In certain sound modes, the audio may be distorted when the volume is set too high. In this case, select another sound mode or lower the volume. . The operation tone (beep) and alarm tone are not mixed in the speaker audio. Remote control Main unit Remote control Main unit . If the main unit is placed on the recharger stand immediately after the main unit is removed from it, the main unit may malfunction (beginning or ending playback unintentionally). After the main unit is removed from the recharger stand, wait for at least 3 seconds before placing the main unit again. 3Start playback. Remote control Main unit Goes off SimFpoler cpalreea For pleasant use… Simple care When the unit gets dirty, wipe with a dry, soft cloth. If the unit is very dirty, wipe with a dry, soft cloth, moisten the cloth slightly and wipe off the dirt. Afterwards, make sure you wipe the unit dry with a dry cloth. . Do not use thinner, benzine, alcohol, etc. for these agents may cause discoloration. . Do not apply oil to the unit, for this will cause it to malfunction. Disc handling precautions Handling Hold the disc so that you Do not attach paper or tape the label side of the disc. Sticker Label side Sticky paste Playing side Cleaning If there are fingerprint marks or foreign matter found on the disc, lightly wipe the disc with a soft cotton cloth (or similar) from the center of the disc outwards in a radial manner. Storage When a disc is not to be played for a long period of time, remove it from the player and store it in its case. Discs which can be played with this unit Discs which can be played with this unit . Certain CD-R/CD-RW discs may recording conditions of the discs. Never play a cracked or warped disc During playback, the disc rotates at high speed player. Therefore, to avoid danger, never u...

Téléchargez votre

Pour télécharger, entrez 2 chiffres :