Évaluations - 2, GPA: 3.5
(
)
)
|
Facilité d'utilisation
4. Repeat steps 2 and 3. You can store up to 20 tracks in the program. If you select more than 20 tracks, programmed tracks are overwritten from the first track. 5. Press to start program play. To confirm the order of programmed tracks, press PROGRAM in stop mode. To clear the program, press 7 (STOP) in stop mode. “PROG.” disappears from the display. PLAYING A CD-R OR CD-RW User-edited CD-Rs (Recordable) and CD-RWs (Rewritable) can be played only if they are already “finalized.” • You can play your original CD-Rs or CD-RWs recorded in music CD format. (However, they may not be played depending on their characteristics or recording conditions.) • Before playing CD-Rs or CD-RWs, read their instructions and cautions carefully. • Some CD-Rs and CD-RWs may not be played on this unit because of their disc characteristics, damage or stain on them, or if the player’s lens is dirty. • CD-RWs may require a longer readout time. (This is caused by the fact that the reflectance of CD-RWs is lower than that of regular CDs.) CARE AND MAINTENANCE CLEANING THE EXTERIOR Disconnect the unit from AC power before cleaning the exterior of the unit with a soft dust cloth. HANDLING CDS • Do not touch the signal surfaces. Hold by the edges, or by one edge and the hole. • Do not affix labels or adhesive tape to the label surfaces. Also, do not scratch or damage the label. • Discs rotate at high speed inside the player. Do not use damaged (cracked or warped) discs. CLEANING CDS • Dirty discs can cause poor sound quality. Always keep discs clean by wiping them gently with a soft cloth from the inner edge toward the outer perimeter. • If a disc becomes dirty, wet a soft cloth in water, wring it out well, wipe the dirt away gently, and then remove any water drops with a dry cloth. • Do not use record cleaning sprays or antistatic agents on discs. Also, never clean discs with benzene, thinner, or other volatile solvents which may cause damage to the disc surface. VICTOR COMPANY OF JAPAN, LIMITED Display BEAT CUT 1 2 FM ST MONO BEAT CUT PHONES AC INO FM antenna Battery compartment Problem Solution • Make sure the AC power cord is securely plugged into an AC power outlet (or that the batteries are fresh). • Unplug the unit for a moment, and then plug it back in again. • Check the outlet by plugging in another device. • Adjust the volume setting. • Make sure you have selected the correct function: CD, TAPE, or TUNER, and headphones are disconnected. • Adjust the FM telescopic antenna for better FM reception. • Rotate the unit to achieve better AM reception. • Try turning off electrical appliances near the unit, such as TV, hair dryers, vacuum cleaners, or fluorrescent lights. • Make sure the tray contains a CD. • Make sure the CD’s label is facing up. • Make sure that pause mode is not activated. • Make sure the CD function is selected. • Clean the CD (as explained in “CARE AND MAINTENANCE”). • Check the CD for warping, scratches, or other damage. • Check for vibration or shock that may affect the unit; move the unit if necessary. • Inspect the recording head and clean it if necessary. • Demagnetize the recording head (as explained in “CARE AND MAINTENANCE”). The unit doesn’t turn on No sound Poor radio reception CD doesn’t play CD sound skips Distorted or noisy recordings 601-600000-040 LVT0999-004A [E] TAPE CARE • Do not expose tapes to sunlight or store them in hot places. High temperatures may warp the shell or damage the tape itself. • Keep cassettes in their boxes when not in use. • Cassette tapes can be erased by magnetic fields produced by magnets, electric motors, electrical transformers, and other devices. Keep tapes away from magnets and magnetic fields. CLEANING THE TAPE HEADS Iron oxide particles from the magnetic tape build up on the parts that come in contact with the tape. These deposits can cause incomplete erasure, muffled playback sound, and might prevent automatic stop. To clean the cassette deck, open the cassette compartment door, push the PLAY button and gently clean the heads, capstan, and pinch roller with a head cleaner. Always unplug the AC power cord before cleaning, and allow 30 minutes drying time after using a liquid cleaner. Clean the heads after every 25 hours of use. • Demagnetize the head occasionally with a head demagnetizing cassette (available from many audio equipment stores). • Never use any metal objects on or near the tape heads. • Do not allow any cleaning material to fall into the tape assembly. REMOTE CONTROL UNIT (SKIP/SEARCH) (STOP) REPEAT (SKIP/SEARCH) PROGRAM TROUBLESHOOTING TIPS SPECIFICATIONS Compact disc player section Type : Compact disc player Signal detection : Non-contact optical pick-up (semiconductor laser) Number of channels : 2 channels Radio section Frequency ranges : FM 88 MHz - 108 MHz AM 530 kHz - 1 600 kHz Antennas : Telescopic antenna for FM Ferrite core antenna for AM Cassette deck section Track : 4-track 2-channel stereo Motor : Electronic governor DC motor for capstan Head...
Ce manuel est également adapté pour les modèles :Lecteurs - 601-600000-030 (561.8 kb)