Évaluations - 0, GPA: 0
(
)
)
|
Facilité d'utilisation
also, save and retrieve the firmware file from the same path. IMPORTANT! backup your files. please ensure that you retain the original files that you have downloaded to your psa. Philips and Nike are not responsible for any loss of content in the case if the product becomes damaged or files are not readable/ legible. Upgrader for Windows users 1 for best results, please make sure you insert a fresh battery into your psa before you start connecting. 2 connect the supplied usb cable to your computer's usb port and your psa. 3 from the task tray Start menu, click on Programs . Nike . psa200 . Upgrader. a window appears: 20 upgrading firmware 4 if you have downloaded the firmware file, click first to browse and select your download .ebn file. click Start to proceed. 5 in the next dialogue boxes, click OK. 6 click the hardware icon on your task tray, if available, to stop and eject your psa. 7 press 2; briefly on your psa so that the device can upgrade itself. the psa display shows briefly: FUpgrade. note: – ”...file not found. Firmware upgrade failed” if this dialogue box appears on your PC screen, this could be due to a loose/ interrupted USB connection, or insufficient battery power. check your USB connection. repeat upgrade operation and make sure you load a fresh battery. only unplug your psa when the display has stopped scrolling completely. also, if you are downloading the upgrade file, make sure you download only the upgrade file for your specific model, and that you save and retrieve the file from the same path. – Battery too low. Upgrade Refused if you also see this message scrolling on your psa after FUpgrade, this means you need to repeat the upgrade due to insufficient battery power. always use a fresh battery to perform the upgrade. – device names may differ to those illustrated, depending on your actual OS and psa model. formatting your psa 21 use the Formatter application to erase all data on your psa, should you have problems with playback. IMPORTANT! backup your files. please ensure that you retain the original files that you have downloaded to your psa. Philips and Nike are not responsible for any loss of content in the case if the product becomes damaged or files are not readable / legible. Formatter for Windows users 1 connect the supplied usb cable to your computer's usb port and your psa. 2 from the task tray Start menu, click on Programs . Nike . psa200 . Formatter. 3 click on the Device drop-down cursor. the name of your psa connected to the computer appears. the other fields are automatically enumerated for your device. (the application will only enumerate devices that are properly mapped to the file system with a drive letter by Windows.) 22 formatting your psa note: – full memory capacity may not be available as some memory will be reserved for the audio player. – device names may differ to those illustrated, depending on your actual OS and psa model. 4 click Start. the Formatter dialogue box appears, asking if you are sure you want to proceed: 5 click OK if you wish to proceed with the format application. when formatting is completed, the Formatting done dialogue box appears. helpful tips 23 helpful tips if a fault occurs, first check the points listed below before taking the set for repair. if you are unable to remedy a problem by following these hints, consult your dealer or service center. warning : do not open the set as there is a risk of electric shock! under no circumstances should you try to repair the set yourself, as this will invalidate the warranty. problem solution no sound – battery weak / incorrectly inserted. correctly insert fresh battery. – psa buttons pressed too quickly. slow down. press firmly. indicator lights up. – headphones not properly connected. insert headphone plug into jack completely. sound skips during playback – mp3 file made at compression level exceeding on the psa 320kbps. – use a lower compression level to record your file into mp3 format – electrical interference from other appliances, e.g. mobile phones, fluorescent, lamps, electric pylons. move away from source of electrical interference. track detail displayed briefly – mp3 track encoded from software other than the and then “skipped” from psa supplied musicmatch. use musicmatch to save the mp3 file and download the song again: 1. open musicmatch. 2. in the My Library window, click Add Files. The Add Tracks to Music Center dialogue box appears. 3. browse for and locate the “skipped” song, and then click Add . Click Exit. 4. in the My Library window, right click on the song file. select Edit Track Tag(s) = OK to save the song as a musicmatch mp3 file. 5. drag and drop the song file from My Library to the Playlist window. 6. download the edited track to the psa (see downloading music to your player from your computer) 24 helpful tips problem solution usb does not – you are using an unsuitable usb cable. connect/function use the supplied usb cable only. – cable connections incorrect / loose. chec...