Log:
Évaluations - , GPA: ( )

Instructions Sony, Modèle NWZ-B135F

Fabricant : Sony
Taille : 339.01 kb
Nom Fichier :

Langue d'enseignement: en

Le document est chargé, s'il vous plaît patienter
Le document est chargé, s'il vous plaît patienter


Par ce dispositif a également d'autres instructions :
Lecteurs - NWZ-B135F (386.26 kb)de
Lecteurs - NWZ-B135F (417.05 kb)ru
Lecteurs - NWZ-B135F (429.69 kb)

Facilité d'utilisation


broadcast well. . Select the frequency manually to improve reception (. page 29). Reception is weak and sound • The radio signal is weak. quality is poor. . Listen to the FM broadcast near a window since the signal may be weak inside buildings or vehicles. • The headphone cord is not extended enough. . The headphone cord functions as an antenna. Extend the headphone cord as far as possible. The FM broadcast is affected by • A device emitting radio signals, such as a mobile phone is being interference. used near the player. . When using such devices as mobile phones, keep them away from the player. Other Symptom Cause/Remedy There is no beep sound when the • “Beep” is set to “Beep OFF.” player is operated. . Set “Beep” to “Beep ON” (. page 44). The player gets warm. • The player may be warm when the battery is being charged and just after charging. The player also may become warm when a large amount of files are transferred. This is normal and is not cause for concern. Set the player aside for a while to allow it to cool down. The date and time have been • If you left the player for a while with the battery used up, the reset. date and time may be reset. . This is not a malfunction. Charge the battery until appears on the screen (. page 14) and set the date and time again (. page 44). Troubleshooting All settings of the player have been reset. • You moved, deleted, or renamed the system files. Or, the built-in flash memory of the player was formatted using other than the “Format” menu of the player. . If you do any of the above operations, the system will be restructured and all settings of the player will be reset when you disconnect the player from the computer or other devices. If the player does not function normally after you format the player using other than the “Format” menu of the player, format the built-in flash memory using the “Format” menu of the player (. page 46). Continued . Troubleshooting (continued) To initialize (format) the player Be sure to format the built-in flash memory using the “Settings” menu on this player, following the procedure below. (Check all contents before formatting, as all data stored will be erased.) 1 Press and hold the BACK/HOME button until the HOME menu appears. 2 Select (Settings) – “Initialize” – “Format” – “OK,” in this order. Press the ./. button to select the item, and then press the . button to confirm. After selecting “OK” and confirming, “FORMATTING…” appears and formatting starts. When formatting is complete, “COMPLETE” appears. Messages Follow the instructions below if a message appears in the display. Message Meaning Remedy AVLS (blinks) The volume level exceeds the rated value while “AVLS(Volume Limit)” is enabled. Turn the volume down or disable “AVLS(Volume Limit)” (. page 44). Message Meaning Remedy CANNOT EXCUTE • You are trying to preset/ delete broadcast stations while the player is not in the FM function. • You are trying to change the equalizer setting while the Bass function is activated. • Change the function to “FM”, and then preset/delete broadcast stations. • Disable the Bass function, and then change the equalizer setting. CHARGING The battery is being charged. This is not an error. Wait until the battery is charged fully. However, you can use the player with the battery not charged fully. DATA ACCESS Accessing the built-in flash This message appears while the built-in flash memory. memory is being accessed. Please wait for access to complete. DRM ERROR An unauthorized distribution Transfer the normal audio file back to the file is detected for copyright computer and then format the built-in flash protection. memory. EXPIRED You are trying to play a song If the song which cannot be played is that has an expiration/ unnecessary, you can delete it from the built- playback time restriction. in flash memory. Continued . Troubleshooting Troubleshooting (continued) Message Meaning Remedy FILE ERROR • The file cannot be read. • The file is not normal. • The player cannot play certain files because of incompatible formats. • Transferring has been interrupted. • Transfer the normal audio file back to the computer and then format the player. • If the song which cannot be played is unnecessary, you can delete it from the built-in flash memory. FORMAT ERROR File systems have been Format the built-in flash memory using the corrupted due to invalid “Format” menu of the player (. page 46). formatting. HOLD The player cannot be operated To operate the player, slide the HOLD switch because the HOLD switch is to the opposite position (. page 11). set to the HOLD position. LOW BATTERY The battery is low. Charge the battery (. page 14). MEMORY FULL • There is not enough free space in the built-in flash memory. • You are trying to record the FM radio (NWZ-B133F/ B135F only) or sound while the player has a combined total of 2,000 files and folders. • Connect the player to the computer and delete any unnecessary songs to increase free space on the player. • You...

Ce manuel est également adapté pour les modèles :
Lecteurs - NWZ-B133 (339.01 kb)
Lecteurs - NWZ-B133F (339.01 kb)
Lecteurs - NWZ-B135 (339.01 kb)
- ()

Écrivez votre propre critique du dispositif



Texte du message
Votre nom :
Entrez les deux chiffres :
capcha





catégories