Évaluations - 3, GPA: 3.7
(
)
)
|
Facilité d'utilisation
1 OFF button 2 SEEK/AMS button 3 (.)(+)buttons 4 ATT button 5 SOUND/SEL button 6 DSPL button 7 PRESET/DISC button You cannot do manual search and manual tuning with the remote. 8 SOURCE button 9 MODE/DIR button (MODE)controls the same function on this unit. Attaching the front panel Place the hole ain the front panel onto theGetting Started spindle bon the unit as illustrated, then push the left side in. Reset button Resetting the unit Before operating the unit for the first time or after replacing the car battery, you must reset the unit. Remove the front pannel and press the reset button with a pointed object, such as a ballpoint pen. Note Pressing the reset button will erase the clock setting and some memorised functions. Detaching the front panel You can detach the front panel of this unit to protect the unit from being stolen. µ a b 1 Press (OFF). 2 Press (OPEN), then slide the front panel to the right side, and pull out the left side of the front panel. 1 2 Notes • Do not put anything on the inner surface of the front panel. • Be sure not to drop the panel when detaching it from the unit. • If you detach the panel while the unit is still turned on, the power will turn off automatically to prevent the speakers from being damaged. • When carrying the front panel with you, use the supplied front panel case. Notes • Be sure not to attach the front panel upside down. • Do not press the front panel too hard against the unit when attaching it. • Do not press too hard or put excessive pressure on the display window of the front panel. • Do not expose the front panel to direct sunlight or heat sources such as hot air ducts, and do not leave it in a humid place. Never leave it on the dashboard of a car parked in direct sunlight or where there may be a considerable rise in temperature. Caution alarm If you turn the ignition key switch to the OFF position without removing the front panel, the caution alarm will beep for a few seconds. Preparing the rotary commander When you mount the rotary commander, attach the label in the illustration below. SOUND LIST MODE SOUND LISTMODE Setting the clock The clock uses a 24-hour digital indication. Example: To set the clock to 10:08 1 Press (SHIFT), then press (3)(SET UP) repeatedly until “Clock” appears. 1Press (5)(n). The hour indication flashes. 2Set the hour. to go backward to go forward 3Press (5)(n). The minute indication flashes. 4Set the minute. to go forward to go backward 2 Press (SHIFT). The clock starts. 3 Press (SHIFT). After the Clock setting is complete, the display returns to normal playback mode. MD Player Listening to an MD 1 Press (OPEN)and insert the MD. Labelled side up 6 2 Close the front panel. Playback starts automatically. If an MD is already inserted, press (SOURCE) repeatedly until “MD” appears to start playback. The title of the MD* and the track title will be displayed in the display window, then the playing time will appear. Elapsed playing timeMD indication Track number * Only if these titles are prerecorded on the MD. Tip If the name of the MD is too long, you can scroll it across the display window by pressing (SHIFT), then (2)(N) while the disc name or track name is displayed. When the last track on the MD is over The track number indication returns to “1, ” and playback restarts from the first track of the MD. To Press Stop playback (OFF) Eject the MD (OPEN)then 6 Changing the display item Each time you press (DSPL), the item changes as follows: $ Track number/ Elapsed playback time $ Disc name*1 $ Track name*2 $ Clock *1 If there is no prerecorded title for a disc “NO D.Name” will appear on the display. *2 If a track title is not prerecorded, “NO T.Name” will be displayed. After you select the desired item, the display will automatically change to the Motion Display mode after a few seconds. In the Motion Display mode, all the above items are scrolled in the display one by one in order. Tip The Motion Display mode can be turned off. (See “Changing the sound and display settings” on page 19.) Automatically scrolling a disc name — Auto Scroll If the disc name, or track name on an MD exceeds 10 characters and the Auto Scroll function is on, information automatically scrolls across the display as follows: • The disc name appears when the disc has changed (if the disc name is selected). • The track name appears when the track has changed (if the track name is selected). • The disc or track name appears depending on the setting when you press (SOURCE)to select an MD. If you press (DSPL)to change the display item, the disc or track name of the MD is scrolled automatically whether you set the function on or off. 1 During playback, press (SHIFT). 2 Press (3)(SET UP) repeatedly until “A.Scrl” appears. 3 Press (5)(n) to select “A.Scrl on.” 4 Press (SHIFT). To cancel Auto Scroll, select “A.Scrl off” in step 3 above. Locating a specific track — Automatic Music Sensor (AMS) During playback, push the SEEK/AMS control up or down and release for each track...