Évaluations - 2, GPA: 4 ( )

Fabricant : Insignia Taille : 370.04 kb Nom Fichier : NS-B4111_10-0166_QSG_V3_EN_Final_lr.pdf Langue d'enseignement:

2 Plug the cord into a household AC power socket. Installing batteries 1 Insert eight C alkaline batteries (not included) into the battery compartment as indicated by the diagram within the compartment. 2 Securely close the battery compartment cover. Notes: Battery power is used only when AC power is disconnected. Replace all batteries at the same time with the same battery type. Do not mix battery types. When CD player is stored unused for a long time, remove the batteries to prevent damage. Using your CD player Warning: Use of any controls, adjustments, or procedures other than those specifi ed herein may result in hazardous radiation exposure. Using the radio 1 Slide the FUNCTION selector to RADIO, then press AM/FM to select AM or FM mode. 2 Turn the TUNING control until you locate the station you want. If you tune to an FM station broadcasting in stereo, the stereo indicator turns on. “ST” will appear in the upper-right of the LCD screen when stereo is on. • For optimum FM reception, make sure that the FM (telescopic) antenna is fully extended and vertical. • For optimum AM reception, rotate the CD player to orient its built-in antenna until you get the strongest signal. Using the CD player The CD player can play standard audio CDs and audio CDs created on a computer’s CD-R/CD-RW drive. 1 Slide the FUNCTION selector to CD, then lift the CD door and insert a CD with the label facing up. Make sure that the CD is correctly mounted on the spindle and locked in place. 2 Close the CD door. After a few seconds, the display shows the total number of tracks on the CD. If the disc is not correctly inserted or defective, the display shows . To play the CD Press PLAY/PAUSE. The current track number is shown on the display. To pause playback Press PLAY/PAUSE. The play indicator flashes on the display. Press PLAY/PAUSE again to resume playback. To stop playback Press STOP. The display shows the total number of tracks on the CD. To skip tracks Press or . To repeat the current track Press REPEAT. To repeat the entire disc (continuous play), press REPEAT twice. To return to normal play, press REPEAT until “REPEAT” disappears from the display. To play tracks in random order Press STOP, press RANDOM, then press PLAY/PAUSE. To stop random playback, press RANDOM again. Listening to an external audio source 1 Connect the external audio device to the AUX IN jack on the back panel of your CD player. 2 Slide the FUNCTION selector on your CD player to AUX. 3 Start playing music from your external audio device. Audio plays through your CD player’s speakers. Maintaining your CDs • Handle CDs only by their edges. Never allow your fi ngers to contact the reflective, unprinted side of the CD. • Do not attach things such as adhesive tape and stickers to your audio CDs. • Periodically clean your CDs with a soft, lint-free, dry cloth. Never use detergents or adhesive cleaners to clean the disc. If necessary, use a CD cleaning kit. • If the CD skips or gets stuck on a section ...

Téléchargez votre

Pour télécharger, entrez 2 chiffres :