Évaluations - , GPA:
(
)
)
Fabricant : JVC
Taille : 3.89 mb
Nom Fichier : decaf72c-4722-48ee-9ab1-9b7040314c5a.pdf
Langue d'enseignement: 
Le document est chargé, s'il vous plaît patienter
 |
Le document est chargé, s'il vous plaît patienter
Facilité d'utilisation
which are located MANUEL D’INSTRUCTIONS either on the rear, bottom or side of the cabinet. Retain this information for future reference. Model No. Serial No. LVT2190-006A [J] Francais English English English Introduction In this manual... • The remote control buttons are used for explaining the operations unless mentioned otherwise. However, if the System has the same or similar button names, they can also be used for the operations. • “File” and “track,”“group” and “folder” are used interchangeably. Precautions Notes on the power cord • When you go away for an extended period of time, remove the plug from the wall outlet. • When unplugging the System from the wall outlet, always pull the plug, not the power cord. • Do not handle the power cord with wet hands. • Disconnect the power cord before cleaning the System or moving the System. • Do not alter, twist or pull the power cord, or put anything heavy on it, which may cause fire, electric shock, or other accidents. Avoid moisture, water, dust, and high temperatures • Do not place the System in moist or dusty places. • If water gets inside the System, turn off the power and remove the plug from the wall outlet, then consult your dealer. Using the System in this state may cause a fire or electrical shock. • Do not expose the System to direct sunlight or place it near a heating device. Notes on installation • Select a place which is level, dry and neither too hot nor too cold—between 5.C and 35.C (41.F and 95.F). • Do not install the System in a place subject to vibrations. • Do not put heavy objects on the System. To prevent malfunction or damage to the System • Do not insert any metallic objects, such as wires, hairpins, coins, etc. into the System. • Do not block the vents. Notes on using the System • Do not carry the System with the disc/iPod door open. • Before moving the System, be sure to remove a disc, iPod, USB mass storage class device, and SD card, then disconnect the power code. • Be sure to close the disc/iPod door before you turn off the System. There are no user-serviceable parts inside. If anything goes wrong, unplug the power cord and consult your dealer. Playable disc/file types • This System can play back... – Audio CD and CD-R/CD-RW in Audio CD format – MP3/WMA files on a CD-R/CD-RW (ISO 9660 format), USB mass storage class device, or SD/SDHC card (maximum data transfer rate: 2 Mbps) • This System cannot play “packet write” discs. • For MP3/WMA playback... – Some MP3/WMA files may not be played back due to their recording conditions. – This System can play only discs of ISO 9660 Level 1 or Level 2. – This System can recognize a total of 999 tracks and 99 groups. – This System can show the Tag data (version 1). • For USB/SD playback... – You cannot play back files larger than 2 GB. – This System may not play back some USB mass storage class devices/SD cards and does not support DRM (Digital Rights Management). Notes on using USB mass storage class device • Connect a USB mass storage class device when the System is turned off to prevent malfunction. • Do not use a USB hub. • It is recommended to use the USB mass storage class device of less than 4 GB storage capacity. • Deactivate the security function of the USB mass storage class device before connecting. • When connecting with a USB cable, use a USB 2.0 cable whose length is less than 1 m (3.3ft). • The USB mass storage class device is charged through the terminal when “USB” is selected as the source. (Some USB mass storage class devices may not be charged through the terminal even if “USB” is selected as the source.) • You cannot connect a computer to the terminal of the System. • Electrostatic shock at connecting a USB mass storage class device may cause abnormal playback of the device. In this case, disconnect the USB mass storage class device then reset the System and the USB mass storage class device. • While playing back a file on a USB mass storage class device, do not disconnect the device. Doing so may cause malfunction on both the System and the device. 2 EnglishEnglish Notes on using iPod • Be sure to reduce the volume on the System to the minimum level before connecting iPod. Adjust the volume after starting playback. • You cannot send any data to the iPod from the System. • Do not carry the System with iPod connected. It might cause damage to the dock or you might drop the iPod. • Do not touch or hit the iPod terminal pins or connector pins in the iPod dock directly. Doing so might cause damage to the connector pins. • iPod is charged through the dock when the System is turned on. • Information shown on the display differs depending on the type of the iPod. • If iPod does not play correctly, update iPod software to the latest version. For details about updating iPod, check on the Apple web site
Lecteurs - NX-PB10 (3.89 mb)