Évaluations - 4, GPA: 3.8
(
)
)
|
Facilité d'utilisation
600n E oooooo o Levelling In order to have a perfect levelling of the cooker adjustable feets are supplyed. They can be screwed in the seats positioned in the corners of the cooker base. Electrical connection The power supply cable since its size depends on the electric connection (see the following connection diagram). 400 3N 'V, H05RR-F 5x2.5 CEI-UNEL 35363 H05VV-F 5x2.5 CEI-UNEL 35746 400V 2N '■O H05RR-F 4x4 CEI-UNEL 35363 H05VV-F 4x4 CEI-UNEL 35746 230V H05RR-F 3x4 CEI-UNEL 35363 H05VV-F 3x4 CEI-UNEL 35746 RT sT tT m. M R IS № Feeding cable installation Terminal block opening: • Unscrew screw “V” • Pull and open the junction block lid For the installation of the feeding cable carry out the following operations: • position the small connection A-B according to the type of connection that has to be performed using the scheme shown in the figure. Note: the small connections are prepared by the Factory for the 230V monophase connection (contacts 1-2-3 are connected to one another). The bridge 4-5 is situated in the lower part of the terminal block. • introduce the cables (N and ■+■) as shown in the figure and tighten the relative screws. • fix the remaining cables on the 1-2-3 clips. • fix the feeding cable in the special cable stop and close the cover fastening it with the screw “V”. Connecting the supply cable to the mains Fit a plug, normalised for the load indicated on the data plate, on the cable; when making the connection directly to the mains, an omnipoIar switch with a minimum opening of 3 mm between the contacts, must be installed between the appliance and the mains. This switch must be sufficient for the load and must comply to regulations in force (the earthing wire must not be interrupted by the switch). The power supply cable must be positioned so that it does not exceed 50°C more than room temperature at any point of its length. Before making the connection check that: • the limiter valve and the home system can support the appliance load (see data plate); • the power supply system has an efficient earthing connection which complies with the provisions of current regulations; • the socket or omnipoar circuit-breaker is easily accessible once the cooker has been installed. 15 Technical Characteristics Oven Dimensions (HxWxD): 34x39x41 cm Volume: 54 Litres Max. Oven Power Absorption: 2100 W Innder dimensions of the plate plate warmer: Width: 44 cm Depth: 42 cm Height: 23 cm Ceramic Hob Back Right: 1200 W Front Right: 1700 W Front Left: 1200 W Back Left: 1700 W Hob Ceramic absorption Max: 5800 W Voltage and Frequency 230V/400V 3N~ 50/60 Hz ENERGYLABEL Energy consumption for Forced convection heating mode: i Fan assisted Declared energy consumption for Natural convection Class heating mode: Convection We recommend cleaning the oven before using it for the first time, following the instructions provided in the "Care and maintenance" section. a i This appliance conforms with the following European Economic Community directives: - 2006/95/EC of 12/12/06 (Low Voltage) and subsequent modifications; - 2004/108/EC of 15/12/04 (Electromagnetic Compatibility) and subsequent modifications; - 93/68/EEC of 22/07/93 and subsequent modifications. - 1275/2008 (Stand-by/ Off mode) Disposal of old electrical appliances The European Directive 2002/96/EC on Waste Electrical and Electronic Equipment (WEEE), requires that old household electrical appliances must not be disposed of in the normal unsorted municipal waste stream. Old appliances must be collected separately in order to optimise the recovery and recycling of the materials they contain and reduce the impact on human health and the environment. The crossed out “wheeled bin” symbol on the product reminds you of your obligation, that when you dispose of the appliance it must be separately collected. Consumers may take their old appliance to public waste collection areas, other communal collection areas, or if national legislation allows return it to a retailer when purchasing a similar new product. All major household appliance manufacturers are active in the creation of systems to manage the collection and disposal of old appliances. Cooker description A Control Panel B Oven Rack C Dripping Pan or Baking Sheet D Adjustable Feet H Electric hotplate indicator light L Selector Knob M Thermostat Knob N Electric hotplate control knobs O Thermostat Light S Timer knob S M O L N A D B C D How To Use Your Appliance The various features of cooker are controlled through the knobs and buttons located on the control panel. Attention: The first time you use the oven we recommend that you set the thermostat on the highest setting and leave the oven on for about a half of an hour with nothing in it. Then, open the oven door and let the room air. The odour that is often detected during this initial use is due to the evaporation of substances used to protect the oven during storage and until it is install...
Ce manuel est également adapté pour les modèles :Plate - K3 C51 (3.8 mb)