Évaluations - , GPA: ( )

Instructions Worksaver, Modèle GLB-3000

Fabricant : Worksaver
Taille : 601.21 kb
Nom Fichier :

Langue d'enseignement:

Le document est chargé, s'il vous plaît patienter

Téléchargez votre Fermer

Le document est chargé, s'il vous plaît patienter

Téléchargez votre Fermer

Keep load low. WARNING! For multiple spear models, always insert spears into the bale – NEVER under the bale. Failure to insert spears into bale can allow bale to roll back when loader is raised, causing serious injury or death. TRANSPORTING —————————————————— CAUTION! When traveling on public roads, whether at night or during the day, use accessory light and devices for adequate warnings to operators of other vehicles. Comply with all federal, state and local laws. Carry load low. Check visibility. If visibility is impaired, reduce speed or consider other means of bale transport. Allow for additional length of loader and spear attachment on tractor while turning. Select a safe ground travel speed when transporting from one area to another. When traveling on roadways, transport in such a way that faster moving vehicles may pass you safely. When traveling over rough or hilly terrain or when making turns, slow down and use extra care. Read all the safety warnings in the front of this manual and in the manual of tractor. 17 OWNER SERVICE MAINTENANCE —————————————————— WARNING! Always stop the tractor, set brake, shut off engine, remove key, and lower loader to ground before attempting to service. Never leave equipment unattended with engine running. WARNING! Do not work under a raised loader unless it is securely blocked or held in position. Do not depend on the hydraulic system to hold loader and attachment in place. Check the pins at the ends of the loader arms. Make sure they are locked in place. Periodically check all bolts to make sure they are tight. Check the bolt on the forged spears to make sure it is tight. Lubricate loader as per instructions in loader manual. Replace safety signs and instruction decals if damaged or missing. Replace any worn or damaged parts immediately. Do not use attachment with any damaged parts. STORAGE —————————————————— • Never store equipment with fuel in the tank inside a building where fumes may reach an open flame or spark. Allow engine to cool before storing in an enclosure. • Do not run engine indoors – exhaust gasses contain carbon monoxide, and odorless and deadly poison. • At the end of the working season or when the attachment will not be used for a long period, it is good practice to clean off any dirt or grease that may have accumulated. • Inspect the attachment for loose, damaged or worn parts and adjust or replace if needed. • Sand areas where paint is chipped or worn and repaint to prevent rust. • Storage location should be level and solid to make hitching and unhitching easy. • Always store in a clean, dry location away from children and livestock. REPLACE SAFETY SIGNS IF DAMAGED OR MISSING. 18 GLB-2200 PARTS LIST 19 GLB-3000 PARTS LIST 20 GLB-330 PARTS LIST 21 GLB-340 PARTS LIST 22 OPTIONAL UPRIGHT KIT PARTS LIST (#831095) 23 SAFETY PRECAUTIONS MOST ACCIDENTS OCCUR BECAUSE OF NEGLECT OR CARELESSNESS. AVOID NEEDLESS ACCIDENTS BY FOLLOWING ALL OF THE SAFETY PRECAUTIONS LISTED BELOW. • Machinery should be operated only by those who are responsible and are authorized to do so. • Stop the engine, lower all equipment, lock the brakes, and remove the ignition key before dismounting from the tractor. • Never stand between tractor and implement while tractor is being backed to hitch. • Loose fitting clothing should not be worn, to avoid catching on various parts. • Detach implement in area where children normally do not play. • When performing adjustments or maintenance on an implement, first lower it to the ground or block it securely at a workable height. • Only a qualified operator should be permitted on tractor when in operation; no riders allowed. • Make certain everyone is in the clear before starting tractor or raising or lowering equipment. • Operate the tractor and implement only while seated in the driver’s seat. • Reduce speed when transporting mounted implements to avoid bouncing and momentary loss of steering control. • A heavy load can cause instability of the tractor. Use extreme care during road travel. Slow down on turns and watch out for bumps. Tractor may need front counterweights to counter-balance the weight of the implement. • Reduce speed on hillsides or curves so there is no danger of tipping. • Avoid driving too close to the edge of ditches or creeks. • Do not transport implement on public roads without reflectors and slow moving vehicle emblem in daylight and with approved warning lights at night and other periods of poor visibility. • Due to the width of some implements, use extra caution on highways, farm roads, and when approaching gates. • Always be sure the implement is in the proper position for transport. • Keep alert and watch the front as well as the rear when working with the implement. OWNER’S/ OPERATOR’S MANUAL MODEL NO.’s GLB-2200 GLB-3000 GLB-330 GLB-340 SINO LEEINGLES, PIDA AYUDA A AIGUIEN QUE SI LO LEA PARA QUE LE TRADUZCA LAS MEDIDAS DE SEGURIDAD. MAY 2008 GLOBAL/EURO-HOOK STYLE INTEGRATED DESIGN BALE SPEAR ATTACHMENTS WHEN O...