Évaluations - 4, GPA: 4.5
(
)
)
|
Facilité d'utilisation
Door lock button 6. Power light 11. Filter assembly 2. Digital LED display 7. Power button 12. Rinse aid dispenser 3. Program button 8. Lower front panel 13. Water inlet connection (Inlet valve) 4. Start/pause button 9 . Door 14. Drain hose connection 5. Delayed start button 10. Spray arm 15. Power Cord Note that your dishwasher may vary slightly in appearance from this unit. The functionality should be the same. 2 Important Safety Instructions WARNING When using your dishwasher, follow basic safety precautions, including the following: > Please read the installation and operating instructions carefully before using the dishwasher for the first time. > These instructions contain very important information with regard to installation, use and maintenance of your dishwasher. > The manufacturer will not be responsible for problems caused by ignoring these safety and cautionary instructions. > This dishwasher is designed for normal household use. > Do not use the dishwasher for industrial and commercial use, or any other purpose. > This dishwasher must be plugged directly into a grounded electrical outlet (Do not use an extension cable or cord.) > Only suitable household utensils should be placed in the dishwasher. (Please avoid utensils that are not heat-resistant, are decorated metal, etc.) > Keep detergents away from children. > If your hot water temperature in your pipes exceeds 149°F adjust the your home’s water heater setting. If your hot water temperature exceeds 149°F, the dishwasher must be connected to a cold water source. > Do not use any kinds of solvents in your dishwasher. They may cause an explosion or fire. > Do not spray water into the appliance. This may cause the failure of electrical parts or electric shock. > Do not push down or sit on the door when the door is opened. This may cause deformation of the door or a risk of personal injury. > Do not use dishwasher detergent for hand washing. Dishwasher detergent should be used for dishwashers only. > If the power supply cord is damaged, it must been replaced by a technician, service agent or a similarly qualified person. > This appliance should be positioned so that the plug is accessible. > The appliance is not intended for use by young children or infirm persons without supervision. > Young children should be supervised to ensure that they do not play with the appliance. > Dishwasher detergents are strongly alkaline. They can be extremely dangerous if swallowed. Avoid contact with skin and eyes and keep children away from the dishwasher when the door is open. Check that the detergent receptacle is empty after completion of the wash cycle. > Connect the dishwasher to your water source using new hoses. Old hoses should not be re-used. WARNING Instructions below advise about a risk of fire, electric shock, or injury to persons. Electrical Instructions: An electrical supply of 120 volts AC only, 60Hz is required. Make sure that a suitable electrical outlet is located close to the dishwasher. For your personal safety, the appliance must be grounded. 3 Installation Instructions Remove All Packing Materials Carefully 1. The water inlet hose from the machine terminates in a .” female connector. Connect the hose to .” male connector. We suggest that your water outlet have a stopcock close by in the pipe. It is best to connect the machine to a hot water supply, but a cold water supply will also suffice. Connect the straight connector from the inlet hose to the water supply securely. Connect the other end (bent connector) to the water inlet valve at the back of the dishwasher cabinet. Do not over-tighten the hose connections – this may damage the threads. Note: If you so desire, you may connect the water inlet hose on to the kitchen sink tap. Connect the water supply hose to a threaded .” quick-connect adapter and make sure that it is fastened tightly in place. 2. Prepare the drain hose so that it is hooked at the end furthest from the dishwasher. Use the supplied plastic U-bend fitting provided for this purpose. The end of this should be dropped into a drainage standpipe, the maximum height of which should be no more than 6” above the base of the dishwasher. To allow for an air gap around the end of the drain hose, the diameter of the standpipe should be at least 30 mm. Connect the other end of the drain hose (L shaped) to the drain port connection at the back of the dishwasher cabinet. Tighten the drain hose end on to the drain port using the metal clip included in the package. Note: You may also drain this dishwasher into a sink- just make sure that the drain line is secure- so that water does not leak onto your counter or floor. Water connection Back view Inlet valve Inlet hose Drain hose Power cord 3. Turn on the water supply and check for leaks. If leaks are located, immediately shut off the water supply and check the hose connections. Tighten the connections if necessary. 4. If for any reason you are unable to stop the leak yourself please seek a...