Évaluations - 5, GPA: 3.8
(
)
)
|
Facilité d'utilisation
Load for 12 Standard Settings fig.A fig.B 2 1 3 4 How to Use the Upper Rack The upper rack is designed to hold more delicate and lighter dishware, such as glasses, coffee and tea cups and saucers, as well as plates, small bowls and shallow pans (as long as they are not too dirty). Position the dishes and cookware so that they do not get moved by the spray of water. The upper rack can be adjusted for height. (See fig.B) fig.C Shelf Lean tall glasses and those with long stems against the shelf-not against other items to be washed. (see fig.C) .5. GB Starting the Appliance Starting a wash cycle... -Make sure that the plug for the appliance is inserted into the wall socket. -Make sure that the water supply is turned on to full pressure. -Load the dishwasher (see the section entitled, "Loading the Dishwasher"). -Pour in the detergent (see the section entitled, "Salt, Dergent and Rinse Aid"). -Turn the knob located on the right of the control panel in the clockwise direction until the number or symbol for the cycle setting is aligned with the reference mark (see the section entitled, "Wash Cycle Table"). -Press the ON-OFF button, and the ON-OFF light will turn on. At this point, the wash cycle will begin. Cancelling or modifying a wash cycle setting Press the ON-OFF button and the ON Light will turn off. Rotate the knob in the clochwise direction to the desired cycle setting (see the section entiled, "Starting a wash cycle...").Then, turn the dishwasher back on using the ON-OFF button. Wash Cycle adjustment Buttons At the end of the wash cycle... When the knob stops turning and is aligned with a STOP mark (see figure), the cycle has finished. Turn off the appliance using the ON-OFF button, turn off the water supply and open the door of the dishwasher. Wait a few minutes before unloading the dishwasher to avoid handling the dishes and utensils while they are still hot and more susceptible to breakage. They will also dry better. Stop ECO Button 1/2 load Button This button (see "close-up View - Control Panel", letter "C") make This button (see "close-up View - Control Panel", letter "B") is it possible to wash dishes using only the upper rack if there are used in the normally dirty dishes, pots and pans. It is standard not enough dishes for a full load. This will allow you to save on daily cycle. water and electrical energy. GB .6. Wash Cycle Table Cycle Eco Button Cycle Selection Information Description of Cycle Detergent Rinse Aid Intensive Wash Very dirty dishes, pots and pans (not to be used with delicate items). Pre-wash with cold water. Rinse with cold water. Extended wash at 60. Rinse with hot water. Drying. 30g . Intensive Wash . Very dirty dishes, pots and pans. (not to be used with delicate items) Pre-wash with cold water. Rinse with cold water. Extended wash at 50. Rinse with hot water. Drying. 30g . Normal Wash Normally dirty dishes, pots and pans. Standard daily cycle. Rinse with cold water. Extended wash at 60. Rinse with hot water. Drying. 25g . (IEC-EN50242) Normal Wash . Normally dirty dishes, pots and pans. Standard daily cycle. Rinse with cold water. Extended wash at 50. Rinse with hot water. Drying. 25g . Rinse For dishes that need to be rinsed and dried only. Rinse with hot water. Drying. . Rinse . For dishes that need to be rinsed and dried only. Rinse with hot water. Drying. . Glassware . Economic, fast cycle to be used for items which are sensitive to higher. Run immediately after dishes are used. Wash at 50. Hot Rinse . Drying. 15g . Soak Pre-wash of dishes, pots and pans while waiting for the load to be completed after the subsequent meal. Short cold wash to prevent food residue from drying on the dishes . .7. GB Energy Saving Tips -It is important to try and run the dishwasher when it is fully loaded in order to save on energy. In order to prevent odours from forming and food from caking onto the dishes, you can run the soak cycle. -Choose the right wash cycle: the choice of cycle depends on the type of dishware, cookware and utensils being washed and how dirty they are. -Use the right amount of detergent: if you use too much detergent, the result will not be cleaner dishes, but, rather, a greater negative impact on the environment. -There is no utility in rinsing dishes, cookware and utensils before placing them in the dishwasher. How to Keep Your Dishwasher in Shape After Every Wash After every wash, turn off the water supply to the appliance and leave the door slightly ajar so that moisture and odours are not trapped inside. Remove the Plug Before cleaning or performing maintenance, always remove the plug from the socket. Do not run risks. No Solvents or Abrasive Cleaning Products To clean the exterior and rubber parts of the dishwasher, do not use solvents or abrasive cleaning products. Rather, use only a cloth and warm soapy water. To remove spots or stains from the surface of the interior, use a cloth dampened with water and a little white vinegar, or a cleaning product made s...
Ce manuel est également adapté pour les modèles :Lave-vaisselle - DW12-HFM (1.36 mb)