Évaluations - 0, GPA: 0
(
)
)
|
Facilité d'utilisation
Use only rinse aid for domestic dishwashers. Combined detergents with rinse-aid component may be used up to a water hardness of 21° dH (37° fH, 26° Clarke, 3.7 mmol/l) only. If the water hardness is over 21° dH, rinse aid must be used. – Open the dispenser 1j by pressing and lifting the plate on the cover. – Carefully pour rinse aid up to the max. mark in the filler opening. –Close cover until it clicks shut. –To prevent excessive foam formation during the next rinse cycle, remove any rinse aid which has run over with a cloth. Setting amount of rinse aid The amount of rinse aid dispensed can be set in 4 stages. Accordingly 0, 1, 2 or 3 displays are lit (see water hardness table). Factory setting: 2. Do not change the amount of rinse aid unless streaks (select lower setting) or water stains (select higher setting) are left on the utensils. – Close the door. – Switch on ON/OFF switch (. The Cleaning display )* flashes. – Press and hold down the START button @. – Rotate programme selector 8 until the rinse aid refill indicator X flashes. – Release button. The rinse aid refill indicator X flashes and the displays )" and h are lit (= Setting 2). To change the setting: – Rotate programme selector 8 until the required setting has been selected. – Press START button @. The rinse-aid refill indicator X goes out. The selected setting is saved. Switching off rinse-aid refill indicator If the rinse-aid refill indicator X is impaired (e.g. when using combined detergents containing rinse-aid component), it can be switched off. – Proceed as described under “Setting amount of rinse aid” and select setting 0. The rinse aid refill indicator X is now switched off. en Utensils Not suitable – Cutlery and utensils made of wood. – Delicate decorative glasses, craft and antique utensils. These decors are not dishwasher-proof. – Plastic parts not resistant to heat. – Copper and tin utensils. – Utensils which are soiled with ash, wax, lubricating grease or ink. Aluminium and silver parts have a tendency to discolour and fade during the wash cycle. Even some types of glass (e.g. crystal glass objects) may turn cloudy after many wash cycles. Glass and utensil damage Causes: – Glass type and glass production process. – Chemical composition of the detergent. – Water temperature of the wash programme. Recommendation: – Use only glasses and porcelain which the manufacturer designates as dishwasher-proof. – Use a detergent which protects utensils. – Take glass and cutlery out of the dishwasher as soon as possible after the programme ends. Loading the dishwasher – Remove large food remnants. It is not necessary to prerinse utensils under running water. – Place the utensils so that – they are secure and cannot tip over. – all utensils with their openings face down. – parts with curves or indentations are at an angle, thereby allowing water to drain. – does not obstruct rotation of the two spray arms 1: and 1B. Very small utensils should not be washed in the machine, as they may fall out of the baskets. Unloading the dishwasher To prevent water from dripping off the upper basket onto the utensils in the lower basket, it is recommended to empty the appliance from the bottom up. Hot utensils are sensitive to shock! Therefore, when the programme ends, leave the utensils to cool down in the dishwasher until they can be handled. Cups and glasses Top basket 1" en 10 Pans Bottom basket 1b Tip Heavily soiled utensils (pans) should be placed in the bottom basket. The more powerful spray jet provides a better dishwashing result. Tip Other examples, such as the best way of loading your dishwasher, can be found on our homepage as a free download. The corresponding Internet address can be found on the back page of these instructions for use. Cutlery basket You should always place cutlery unsorted with the points downwards. To prevent injuries, place long, pointed implements and knives on the knife shelf. EtagereEtagere * The etagere and the space underneath can be used for small cups and glasses or for larger items of cutlery, such as wooden spoons or serving cutlery. The etagere can be folded up if not required. * Depending on the model, a 3-fold height adjustment is possible. To do this, first place the etagere vertically and pull up, then place at a slight angle, push down to the required height (1, 2, or 3) and snap into place. Folding spikesFolding spikes * * depending on model The spikes can be folded down to improve arrangement of pans, bowls and glasses. en Small accessories holder * * depending on model Light-weight plastic accessories, e.g. cups, lids, etc. can be held securely in the small accessories holder. Knife shelf * * depending on model Long knives and other utensils can be arranged horizontally. Adjusting the height of the basket * * depending on model If required, the height of the upper utensils basket 1" can be adjusted to provide more space for tall utensils either in the upper or lower basket. Appliance height 81.5 cm Top b...
Ce manuel est également adapté pour les modèles :Lave-vaisselle - DGS4322/09 (1.75 mb)
Lave-vaisselle - DGS4322/16 (1.75 mb)
Lave-vaisselle - DGS4322/18 (1.75 mb)
Lave-vaisselle - DIS4335/01 (1.75 mb)