Évaluations - 0, GPA: 0
(
)
)
|
Facilité d'utilisation
Non- delicate Mixed Programme selection The most appropriate programme can be identified by comparing the type of crockery, cutlery, etc., as well as the amount and condition of food remains, with the details contained in the programme overview. Type of crockery e.g.china, pots/pans, cutlery, glasses, etc. Type of food remains Amount of food remains Condition of food remains Wash programme Programme sequence Delicate Mixed Soups, casseroles, sauces, potatoes, pasta, rice, eggs, roast or fried food Soups, potatoes, pasta, rice, eggs, roast or fried food Coffee, cakes, milk, sausage, cold drinks, salads Rinse off if the dishes have been stacked for several days in the dishwasher prior to washing. a lot a little very little stuck on hard loosely attached Normal 65° Intesive 70° Drying Drying DryingEco 50° Quick 35° Pre-rinse Rinse-aid 70° Rinse-aid 70° Main rinse Main rinse Rinse-aid 55° Wash 35° Rinse-aid 65° Wash 50° Pre-rinse Gentle 40° Pre-rinse Wash 40° Main rinse Rinse-aid 55° Drying Pre-rinse 50° Wash 70° First rinse Second rinse Second rinse First rinse Wash 65° Pre-rinse Reduce costs! If only a small number of dishes have been loaded into the dishwasher, selecting a programme that operates at the next lowest temperature will usually suffice. en Programme specifications The programme specifications can be found in the summary of instructions. Programme specifications refer to normal conditions. Greater deviations may occur due to: varying amounts of dishes water supply temperature water pipe pressure ambient temperature mains voltage tolerances and the tolerances specific to the appliance (e.g. temperature, amount of water, etc.) The water consumption values refer to a set water hardness value of 2. Washing dishes Switching on the appliance and selecting the programme Turn on the tap fully. Rotate the programme selector 1 to the desired programme. The appliance is now switched on and the Standby indicator 4 lights up. You can now start the programme. Starting the programme Press the START/STOP button 8 . The Standby indicator 4 goes out and the Programme progress indicator 5 lights up. The programme is executed. End of programme The programme ends when the Programme progress indicator 5 has gone out and the End-of-programme indicator 6 illuminates. When the programme ends, the ”Top basket washing” function is de-activated if required (only some models). Several minutes after the programme has ended: Open the appliance door. Wait until the dishes have cooled down and then remove. When the programme has ended, you can either switch off the appliance or restart it with the same or another programme. Switching off the appliance Several minutes after the programme has ended, rotate the programme selector 1 to the OFF position. Close the tap (not applicable if Aquastop fitted). en Interrupting the programme Press the START/STOP button 8 . The Programme progress indicator 5 flashes, i.e. the programme has been interrupted. You can now open the appliance door to add more dishes, for example. As soon as the door is closed, the programme continues automatically. If there is a hot-water connection or if the appliance has already heated up, leave the door open slightly for several minutes before closing it. Otherwise, the door may jump open due to expansion. If you did not open the door, press the START/STOP button 8 to continue the programme. When the door is closed, the programme can be interrupted for a maximum 9 hours. Then the programme continues automatically. Terminating the programme Press the START/STOP button 8 for approx. 3 seconds. The programme progress indicator 5 goes out. The programme is terminated. If required, the ”Top basket washing” or ”Timer programming” function (only some models) is also de-activated. The End-of-programme indicator 6 flashes for approx. 1 minute and the water is drained at the same time. In order not to terminate the pumping process, you should leave all settings unchanged and the door closed while the indicator is flashing. When the pumping process has ended, the End-of-programme indicator goes out and the Standby indicator lights up. You can now restart or switch off the appliance. 64 Changing the programme You can change the programme at any time (except in the drying section of the programme) simply by rotating the programme selector 1 . Sections of the previous programme (e.g. cleaning) which have already begun end before the new programme continues with the next sections. If the timer programming has been activated (only some models), the time continues counting down unchanged. en Additional functions * * on applicable models Top basket washing* Use this function only if you have to wash a few dishes. This will save you energy and water. Load the top basket only, the bottom basket must be empty. Add slightly less detergent than is recommended for a full load. Select the programme and switch on ”Top basket washing” by pressing the button 11 . The associated indicator l...
Ce manuel est également adapté pour les modèles :Lave-vaisselle - SGS43A32GB/04 (2.49 mb)
Lave-vaisselle - SGS43A42GB/01 (2.49 mb)
Lave-vaisselle - SGS43A42GB/04 (2.49 mb)
Lave-vaisselle - SGS53A12GB/01 (2.49 mb)