Évaluations - 2, GPA: 4 ( )

Fabricant : Bosch Taille : 2.82 mb Nom Fichier : Langue d'enseignement:

Par ce dispositif a également d'autres instructions :

Lave-vaisselle - SGV57T23EU/01 (2.8 mb)

Lave-vaisselle - SGV57T23EU/01 (2.83 mb)

Lave-vaisselle - SGV57T23EU/01 (3.1 mb)

If the rinse aid refill indicator 6 or salt refill 5 indicator is defective and you would like to switch it off, proceed as follows: Switching the rinse aid refill indicator off and on You can switch the rinse aid refill indicator 6 on or off. This function can be changed as follows. Hold down the programme button and press the main switch 1 until the digital display lights up, then release the buttons. 9 is indicated on the digital display (rinse aid refill indicator on). By pressing the programme button 3 , you can switch off or switch on the rinse aid indicator. Switch off the main switch 1 ; the setting is saved. en Switching the salt refill indicator / water softening system off and on Hold down the programme button B and switch on the main switch 1 , then release the buttons. The illuminated button B and the factory-set value on the digital display flash. To change the setting: press the programme button B . Each time the button is pressed, the set value increases by one; when the value is reached, the display jumps back to (the salt refill indicator / water softening system has been switched off). Switch off the main switch 1 . The set value is stored within the device. Approx. 4 litres of water are required to regenerate the water softening system. As a result, the water consumption per rinse cycle increases by 0 to maximum 4 litres depending on the water hardness setting. Note If you use the detergent and rinse aid separately or switch from combined detergents to standard cleaning products, ensure that the rinse aid refill indicator has been switched on and the water softening system has been set to the correct water hardness. en Overview of programmes The max. possible number of programmes is illustrated in this overview. The corresponding programmes for your appliance can be found on the fascia. Type of dishes e.g. porcelain pans, Non- sensitive Mixed Delicate cutlery, glasses, Mixed etc. Type of food remnants e.g. Amount of food remnants State of food remnant Wash programme Rinse if the utensils have been left several days prior to washing in the dishwasher. Coffee, cake, milk, sausage, cold drinks, salads Soups, souffles, potatoes, pastries, rice, eggs, fried food Coffee, cake, milk, sausage, cold drinks, salads Soups, potatoes, pastries, rice, eggs, fried food Very little LittleLarge High NormalLightly Adhesive Auto 65–75 Auto 55–65 Auto 35–45 Eco 50 Quick 45 Prerinse Low Normal Programme- sequence The programme sequence is optimised and adjusted according to the degree of soiling on the utensils. Dry Dry Clean 65 Intermediate rinse Clean 50 Prerinse Clean 55 Intermediate rinse Clean 45 Prerinse en Washing dishes Reduce costs! If only a small number of dishes have been loaded into the dishwasher, selecting a programme that operates at the next lowest temperature will usually suffice. Programme data The programme specifications can be found in the summary of instructions. Programme specifications refer to normal conditions. Greater d...

Téléchargez votre

Pour télécharger, entrez 2 chiffres :