Évaluations - 0, GPA: 0 ( )

Fabricant : Bosch Taille : 5.17 mb Nom Fichier : Langue d'enseignement:

ATTENTION To avoid dishwasher damage, do not allow water to remain in your dishwasher systems through extended periods of freezing temperatures. Freezing temperatures can damage your dishwasher. Wiping Up Spills and Splash-out Water may occasionally splash out of your dishwasher, especially if you interrupt a cycle or open the dishwasher door during a cycle. To avoid loor damage and possible mold growth, do not allow wet areas to remain around or under the dishwasher. Check/Clean the Stainless Steel Inner Door and Tub Clean the outer edges of the inside door panel regularly to remove debris that might collect there from normal loading. if spots begin to appear on the stainless steel tub or inner door, make sure the rinse agent reservoir is full. Check/Clean the Spray Arm Nozzles occasionally check the spray arms to ensure that the spray arm nozzles (holes) are unobstructed. You must remove the spray arms to check them for obstruction. To remove the top spray arm: 1. remove the empty top rack from the dishwasher. 2. turn the rack upside-down. the top spray arm is held in position by a locking nut as shown in figure 25a. turn the locking nut counter-clockwise 1/8 turn and remove it, as shown in figure 25B to release the spray arm. 3. remove the spray arm as shown in figure 26. 4. look for obstruction in the spray nozzles. 5. If the spray nozzles need cleaning, lush them under running water. To reinstall the top spray arm: 1. return the top spray arm to its installed position. 2. return the locking nut to its installed position and turn it 1/8 turn clockwise. 1 . return the top rack to the top rack roller guides. To remove the bottom spray arm: 1. remove the empty bottom rack from the dishwasher tub. 2. Grasp and lift the bottom spray arm as shown in figure 27. 3. look for obstruction in the spray nozzles. 4. If the spray nozzles need cleaning, lush them under running water. To reinstall the bottom spray arm: 1. return the bottom spray arm to its installed position and press it so that it snaps into place. 2. return the bottom rack to its installed position. Check/Clean the Filter System This dishwasher has a ilter system that consists of a Large Object Trap/Cylinder Filterassembly and a Fine Filter. Select models have an additional Micro Filter. The ilter system is located on the inside of your dishwasher under the lower rack and is easily accessible. During normal use, the ilter system is self-cleaning. You should occasionally inspect it for foreign objects and clean it when necessary. CAUTION To avoid injury, do not reach into the large object trap with your ingers. The large object trap could contain sharp objects. This dishwasher has a ilter system that consists of a Large Object Trap/Cylinder Filterassembly and a Fine Filter. The ilter system is located on the inside of your dishwasher under the lower rack and is easily accessible. During normal use, the ilter system is self-cleaning. You should occasionally inspect it for foreign objects and ...

Téléchargez votre

Pour télécharger, entrez 2 chiffres :