Log:
Évaluations - 0, GPA: 0 ( )

Instructions Bosch, Modèle SHX98M09UC/57

Fabricant : Bosch
Taille : 4.48 mb
Nom Fichier :
Langue d'enseignement: enesfr
Aller à la télécharger



Par ce dispositif a également d'autres instructions :

Facilité d'utilisation


Stainless Steel, Sterling Silver, and Silver Plate: Place these pieces so that they do not contact dissimilar metals. Not Recommended Acrylic: Crazing (small cracks throughout the acrylic) may occur. Adhesive-Joined Pieces: Adhesives that join materials such as plastic, wood, bone, steel copper, tin, etc. may loosen. Bone-Handled Utensils: Handles may separate. Iron: Iron will rust. Hand-wash and dry immediately. Non-Dishware Items: Your dishwasher is intended for use in cleaning ONLY standard household dishware and kitchenware. Pewter, Brass, Bronze: Pewter will tarnish. Hand-wash and dry immediately. Tin: Tin will rust. Hand-wash and dry immediately. Wood: Wooden bowls, wooden utensils, and wood-handled utensils can crack, warp, and lose their finish. Preparing and Loading the Dishware Dishware Preparation Do not pre-wash items having loosely-attached soiling. Remove large food particles, bones, seeds, toothpicks, and excessive grease. Items having burned-on, baked-on or starchy soils may require pre-treatment. Loading the Dishwasher Check the Materials section of this manual if you are unsure about an item’s dishwasher suitability. Load only dishwasher-safe items into the dishwasher. Load dishes in the dishwasher racks so that the insides of bowls, pots, and pans are facing the spray arms. Avoid nesting and contact points between dishes. Separate items of dissimilar metals. Loading the Top Rack Figures 1 and 2 show typical 10 and 12 place load patterns for the top rack. NOTE: Make sure items do not protrude through the bottom of the racks and block the spray arms. Figure 1 10 place setting top rack Figure 2 12 place setting top rack Figure 3 Loading the Bottom Rack Place large items in the bottom rack. Load pots, pans and bowls upside-down. Figures 3 and 4 show typical mixed loads for the bottom rack. Loading Extra Tall Items If an item is too tall to be placed into the bottom rack even with the top rack in the raised position, remove the empty top rack by pulling it out of the dishwasher until it stops rolling. Pull the front of the rack upward and outward until the rollers are completely free of the roller guides. Set the top rack aside. Push the roller guides back into the dishwasher. Insert the Extra Tall Item Sprinkler into the top rack spray outlet and turn the sprinkler clockwise to lock it into position as shown in Figure 5. Place your extra tall item(s) in the bottom rack as shown in Figure 6. NOTE: Keep the vent on the tub’s right side clear by placing tall items such as plastic cutting boards and tall baking sheets on the bottom rack’s left side, center, or back. NOTICE To avoid dishwasher damage, do not reinstall the top rack without removing the extra tall item sprinkler. Do not reinstall the top rack with the sprinkler installed. To remove the sprinkler and return the dishwasher to its normal condition: 1. Turn the sprinkler counterclockwise and remove it. 2. Retrieve the top rack. 3. Tilt the top rack upwards and position the top rack rollers onto the roller guides. 4. Continue pushing the top rack until the rollers are on the guide. 10 place setting bottom rack NOTICE To avoid dishwasher damage, do not load the dishwasher with objects such as paper products, plastic bags, packing materials, or anything other than normal dishware and kitchenware. Do not load the dishwasher with anything other than dishwasher-safe dishware and kitchenware. Figure 4 12 place setting bottom rack Figure 5 Figure 6 Do not block vent. Figure 7 Rack Accessories Flip Tines The racks on select models consist of tines that you can fold down or raise depending on what you have to load in the rack. To fold down: Grasp the tine near the locking mechanism.• Release from notch.• Push downwards.• • Top Rack Height Adjustment The top rack can be lowered to accommodate large items in the top rack, and raised to make room for large items in the bottom rack. To raise the top rack: 1. Pull the top rack out of the dishwasher until it stops rolling. 2. Grasp the top of the rack above the Automatic Height-Adjustable Top Rack handles and pull it upward as shown in Figure 8 until the Automatic Height-Adjustable Top Rack handles lock the rack into position (you do not need to press the Automatic Height-Adjustable Top Rack handles in order raise the rack). NOTE: Before you push the top rack back into the dishwasher, ensure that the rack height is the same on both sides. Otherwise, the dishwasher door will not shut and the top rack spray arm will not connect to the water circuit. To lower the top rack: 1. Pull the top rack out of the dishwasher until it stops rolling. 2. Press the Automatic Height- Adjustable Top Rack handles inward as shown in Figure 9 and let the rack drop. Cup Shelves Cup shelves are used to hold cups and other large items such as ladles and serving spoons. To use the cup shelves, fold them downwards so that they are positioned as shown above. Place cups upside down on the shelves. See Figure 10 Figure 8 Figure 9 F...

Ce manuel est également adapté pour les modèles :
Lave-vaisselle - SHX98M09UC/64 (4.48 mb)
Lave-vaisselle - SHX98M09UC/70 (4.48 mb)

Écrivez votre propre critique du dispositif



Texte du message
Votre nom :
Entrez les deux chiffres :
capcha





catégories