Évaluations - 0, GPA: 0
(
)
)
|
Facilité d'utilisation
– If you switch from combined detergents to solo detergents, ensure that the water softening system and amount of rinse aid have been set to the correct value. en Overview of programmes The max. possible number of programmes is illustrated in this overview. The corresponding programmes and their arrangement can be found on the fascia. Type of utensils Type of soiling Programme Possible additional options Programme sequence pots and pans, non-sensitive utensils and cutlery very adhesive burned- in or dried-on food remnants containing starch or protein . Intensive 70° all Prerinse Clean 70° Intermediate rinse Final rinse 70° Dry U Normal 65° Prerinse Clean 65° Intermediate rinse Final rinse 70° Dry mixed utensils and cutlery part dried, common household food remnants a Eco 50° Prerinse Clean 50° Intermediate rinse Final rinse 65° Dry sensitive utensils, cutlery, temperature- sensitive plastic and glasses slightly adhesive, fresh food remnants e Gentle 40° Reduce Time Half load Prerinse Clean 40° Intermediate rinse Final rinse 55° Dry o Quick 45° none Clean 45° Intermediate rinse Final rinse 55° all types of utensils cold rinsing, intermediate cleaning u Prerinse none Prerinse Programme selection You can select a suitable programme according to the type of utensils and degree of soiling. Information for test institutes Test institutes can request the conditions for running comparison tests by sending an e-mail to dishwasher@test-appliances.com. Quote the appliance number (ENr.) and the production date (FD) which you can find on the rating plate 9* on the appliance door. en Additional options * depending on model Additional options can be set with the buttons 8. Y Express Wash/ Speed Perfect * The >>Express Wash/ Speed Perfect<< function can reduce the running time by approx. 20% to 50% depending on the selected rinse programme. To obtain optimum cleaning and drying results at a reduced running time, water and energy consumption are increased. § Half load * If you have only a few items to wash (e.g. glasses, cups, plates), you can switch to “half load”. This will save water, energy and time. It is recommended to put a little less detergent in the detergent dispenser than for a full load. Washing the dishes Programme data The programme data (consumption values) can be found in the summary of instructions. This data refers to normal conditions and the water hardness set value 2. Different influencing factors such as water temperature or mains pressure may result in deviations. Switching on the appliance – Turn on the tap fully. – Open the door. – Switch on the main switch (. The display of the last selected programme lights up. This programme runs if no other programme button ` is pressed. – Close the door. The programme starts running. End of programme The programme has ended when the programme end display @ and the display of the executed programme are lit. The end of the programme is also indicated by an acoustic signal. This function can be changed as follows: – Open the door. – Hold down programme button 3 and switch on the main switch (. – Release both buttons. The programme button 3 flashes. To change the setting: – Press programme button 3. Each time the Programme button 3 is pressed, the buzzing sound changes in 4 stages (from off to loud). – Switch off main switch (, the set value is saved. – Close the door. en Switching off the appliance Short time after the end of the programme: – Open the door. – Switch off the main switch (. – Turn off the tap (not applicable if Aqua- Stop fitted). – Remove the utensils when they have cooled down. a=Warning At the end of the programme please open the door fully and not partially when emptying the dishwasher. Any escaping water vapour could damage sensitive worktops. Interrupting the programme – Open the door. – Switch off the main switch (. The LEDs go out. The programme is saved. If the door was opened on an appliance which has a warm water connection or is heated, first leave the door ajar for several minutes and then close. Otherwise, expansion (pressure) may cause the appliance door to spring open or water to run out of the appliance. – To continue the programme, switch on the main switch ( again. – Close the door. Terminating the programme (Reset) – Open the door. – Simultaneously press programme buttons # and 3 for approx. 3 sec. – Close the door. The programme sequence lasts approx. 1 min. – Programme end display @ is lit. – Open the door. – Switch off the main switch (. – Close the door. Changing the programme After you have switched the appliance on, it is possible to change the programme within 2 min. If you want to change the programme afterwards, the appliance waits until the initiated programme section (e. g. washing) ends. en Maintenance and care A regular inspection and maintenance of your machine will help to prevent faults. This saves time and prevents problems. Overall condition of the machine – Check spray arm for grease and limescale deposits. If...
Ce manuel est également adapté pour les modèles :Lave-vaisselle - 3VT341ND/44 (1.27 mb)