Log:
Téléchargements : 30   Taille : 454 kb   Fabricant : DCS  
Catégorie : Lave-vaisselle
@name

A Message To Our Customers A Message To Our Customers Thank you for selecting this DCS Professional Dishwasher. Because of its unique features, we have developed this Use and Installation Guide. It contains valuable information on how to properly operate and maintain your new Dishwasher for years of safe and enjoyable cooking. To help serve you better, please fill out and return the Ownership Registration Card and keep this guide handy, as it will help answer questions that may arise as you use

Téléchargements : 29   Taille : 2 mb   Fabricant : DCS  
Catégorie : Lave-vaisselle
@name

DishDrawer® must be securely anchored before it is operated. AwARNING! Before installing the DishDrawer®, remove the house fuse or open the circuit breaker. Ensure all water connections are turned OFF. It is the responsibility of the plumber and electrician to ensure that each installation complies with all Codes and Regulations. Important! These instructions must be followed precisely to ensure correct venting and operation of the DishDrawer®. In the event of a fault related to the incorrec

Téléchargements : 34   Taille : 2 mb   Fabricant : DCS  
Catégorie : Lave-vaisselle
@name

WATER SOFTENER .DD224.H, DD124.H MODELS ONLY. SETTING UP THE WATER SOFTENER Using hard water (above 100ppm) for dishwashing can be detrimental to the performance of your DishDrawer®. Glasses will become opaque and dishes will become spotted or covered in a white film. DETERMINE THE WATER HARDNESS IN YOUR LOCAL AREA Your local water company will be able to provide you with information. Identify the setting you require for your DishDrawer® from the water hardness table below. For example, if your

Téléchargements : 40   Taille : 2 mb   Fabricant : DCS  
Catégorie : Lave-vaisselle
@name

Ensure moisture protection tape has been applied and the cabinet is sealed according to the DishDrawer® Installation Instructions. The DishDrawer® opens and closes freely. The DishDrawer® must be free to close completely with no resistance from cabinetry. For the integrated models, check the 5/16” air gap has been achieved in the correct place. The power supply is connected and switched on. The inlet water hose is connected and turned on. There should be no leaks. The drain hose(s) are connected





catégories