Évaluations - , GPA: ( )

Instructions Microsoft, Modèle MP C3500

Fabricant : Microsoft
Taille : 3.76 mb
Nom Fichier :

Langue d'enseignement:

Le document est chargé, s'il vous plaît patienter

Téléchargez votre Fermer

Le document est chargé, s'il vous plaît patienter

Téléchargez votre Fermer

Embed fonts in the PDF file you want to print and then print. Printing by Bluetooth is slow. The number of jobs exceeds the capacity of the machine. Reduce the number of jobs. Printing by Bluetooth is slow. • A communication error might have occurred. • Interference from IEEE 802.11b (wireless LAN) devices can reduce communication speed. • Bluetooth transmission speeds are not high. • Remove the machine from close proximity with IEEE 802.11b wireless LAN devices. • If there are active IEEE 802.11b wireless LAN devices or other Bluetooth devices nearby, relocate the machine or disable those devices. If the problem cannot be solved, contact your service representative. 62 When PictBridge Printing Does Not Work When PictBridge Printing Does Not Work This section explains likely causes and possible solutions for problems that can occur when PictBridge printing. Problem Cause Solution PictBridge is not available. There is a problem with the USB connection or the PictBridge settings. Use the following procedure to check the connection and settings: A Disconnect and then reconnect the USB cable. B Check the PictBridge settings are enabled. C Disconnect the USB cable, and then turn off the machine. Turn the machine back on. When the machine has fully booted up, reconnect the USB cable. When two or more digital cameras are connected, the second and subsequent cameras are not recognized. You have connected multiple digital cameras. Connect one digital camera only. Do not connect multiple cameras. Printing is disabled. The number of originals exceeds the maximum number of pages that can be printed at a time. The maximum specifiable print quantity at a time is 999. Respecify the quantity to 999 or less, and then retry printing. Printing is disabled. There is no paper of the specified size remaining. There is no paper of the specified size remaining. If you have to use paper that is not of the specified size, perform Form Feed. To cancel printing, perform Job Cancel. 4 63 Troubleshooting When Using the Printer Function 4 64 5. Troubleshooting WhenUsing the Scanner Function This chapter explains likely causes of and possible solutions for scanner function problems. When Scanning is Not Done as Expected This section explains causes and remedies when scan results are not as expected. Problem Cause Solution The scanned image is dirty. The exposure glass or auto document feeder (ADF) is dirty. Clean these parts. See p.122 “Maintaining Your Machine”. The image is distorted or out of position. The original was moved during scanning. Do not move the original during scanning. The image is distorted or out of position. The original was not pressed flat against the exposure glass. Make sure that the original is pressed flat against the exposure glass. The scanned image is The original was placed upside Place the original in the correct upside down. down. orientation. See “Placing Originals”, Copy/Document Server Reference. No image results from scanning. The original was placed with the front and back reversed. When the original is placed directly on the exposure glass, the side to be scanned must face down. When the original is fed via the ADF, the side to be scanned must face up. See “Placing Originals”, Copy/Document Server Reference. Images are scanned in rotated. If you set the original with its upper edge backward and save full color/grey scale images as a TIFF or JPEG file, they are scanned in rotated. When placing a stack of originals in the ADF, place their upper edges first. See “Various Scan Settings”, Scanner Reference. The scanned image • If you scan originals using Scanning at a higher resolution contains white spaces. functions other than the network TWAIN scanner function, certain paper size and resolution settings may produce scanned images that are larger than the specified size because of margins being added to the sides. • If the File Format Converter (optional ) is installed, the margins may become wider. may reduce the margins. Troubleshooting When Using the Scanner Function When You Cannot Send Scanned Files The following sections explain likely causes of and solutions for Network Delivery and E-mail Sending-related problems. When Stored Files Cannot be Accessed This section explains likely causes of and possible solutions for job access-related problems. Problem Cause Solution The stored file is locked and is not accessible. The file, which is password protected, is locked because the password was incorrectly entered ten times. Contact the administrator. 5 When You Cannot Browse the Network to Send a Scan file This section explains likely causes of and possible solutions for the Browse Network failing to operate when files are sent. Problem Cause Solution The network cannot be browsed when specifying the destination folder. The following machine settings may not be correct: • IPv4 address • Subnet Mask Check the settings. See “Network Settings ”, General Settings Guide. When the TWAIN Driver Cannot be Start...