Évaluations - 3, GPA: 3.3
(
)
)
|
Facilité d'utilisation
2 W, Printing: Approx. 18 W (Approx. 26 W max.) AC adapter Rated input: AC 100 to 240 V, 50/60 Hz Rated output: DC 8.5 V, 2.5 A Weight Approx. 430 g Outside dimensions 106 (W) x 170 (D) x 116.5 (H) mm Operating temperature and humidity 5 to 40°C, 10 to 85% RH (No condensation) Storage temperature and humidity -20 to 60°C, 10 to 90% RH (No condensation) Reliability Print head life: Pulse resistance: 1 x 108 pulses (Printing rate 12.5%) Wear resistance: 50 km (At normal temperature/humidity with recommended paper used) Safety standard * VCCI Class A, UL, C-UL, FCC Class A, TUV, GS, CE marking Note: *: Represents the safety standards acquired when CITIZEN SYSTEMS-made adapters (28AD series) are used. — 11 — 2. EXPLANATION OF PRINTER PARTS 2.1 Printer Appearance Paper cover Operation panel • Paper cover Paper is located inside this cover. • Cover open button To refill or replace paper, open the paper cover by pushing this button. • Power switch This switch turns the printer power ON/OFF. — 12 — Operation Panel POWER LED FEED switch ERROR LED FEED POWER ERROR • POWER LED Lights when the printer power is on and goes off when the printer power is off. May blink or light in a special mode or in case of a failure. • FEED switch Pressing this switch once causes a paper feed of one line. Pressing the switch continuously causes the paper to feed continuously. • ERROR LED Lights or blinks when paper is empty or in case of a failure. The interval length of blinking shows the type of error. Rear Connectors Power connector Interface connector (Serial, parallel, etc.) • Power connector Connects to the cable from AC adapter. • Interface connector (Serial, parallel, etc.) Connects to the interface cable. — 13 — 2.2 Paper Cover Inside • Paper cutter Used to cut paper at the time of paper setting or at the end of printing. • Print (thermal) head Prints characters and/or graphic data on thermal paper. • Paper-end sensor Stops printing when this sensor detects paper end. • Paper feed roller Feeds paper as part of print mechanism. • Paper-near-end sensor Detects paper low state. Changes the setting in accordance with the inner diameter of paper roll or setting status. 2.3 Other Built-in Functions • User memory Allows registration of user-defined characters and logo data on the nonvolatile memory. Data registered remains even after the printer power is off. • Memory switch Setting of various kinds of functions can be registered on the nonvolatile memory. The setting registered is valid even if the printer power is turned off. In addition, memory switch setting can be changed by manual operation. — 14 — 3. PREPARATION 1. Turn off the printer power. 2. Plug in the cable connector of the AC adapter to the power connector at the rear of the printer. 3. Connect the AC power cord to the inlet of the printer, and insert the AC power-cord plug into a suitable wall outlet. • Use only the specified AC adapter with the printer. • When d isconnecting a cable, do not pull out by the cable. Always hold the plug. • Always keep the AC power supply away from other noise generating equipment. • Do not pull the power cord. Otherwise fire, electric shock, or power disconnection may result. • If lightn ing is approaching, unplug the AC power cord from the wall outlet. Otherwise fire or electric shock may result. • Keep the power cord away from heat generating appliances. Otherwise the shield of power cord may be fused resulting in a fire or electric shock. • If the printer is not to be used for a long time, leave it disconnected from its supply outlet. • Lay the cable not to be caught by the leg or the like. AC adapter Cable connector — 15 — 3.2 Connecting Interface Cables Turn off the printer and unplug the power connector. Then follow the procedure for interface cable connection. Orient the interface cable terminal correctly and insert it into the interface connector. Serial Interface Parallel Interface USB Interface A CAUTION! • When d isconnecting the cable, always hold the connector. • Lay the cable not to be caught by the leg or the like. For serial interface cable, use the one with the following connection. 25-pin - 25-pin cable 9-pin - 25-pin cable PC Printer PC Printer Signal Pin X Pin Signal FG 1 1 FG TXD 2 2 TXD RXD 3 3 RXD CTS 5 4 RTS DSR 6 6 DSR SG 7 7 SG DTR 20 / \ 20 DTR Signal Pin Pin Signal RXD 2 2 TXD TXD 3 3 RXD DTR 4 4 RTS SG 5 6 DSR DSR 6 7 SG CTS 8 20 DTR — 16 — 3.3 Installing the Printer The printer can be installed horizontally or on the wall. At the time of shipment, the printer is set for horizontal installation. To install the printer on the wall, the following adjustments are required. A CAUTION! • No screw for wall mounting is provided. Check the structure and strength of the wall (plaster board or stronger one) and prepare two appropriate screws (round-head wood screws of 3.1^, 16 mm or mor...