Évaluations - , GPA: ( )

Instructions Savin, Modèle 2545/2545p

Fabricant : Savin
Taille : 2.38 mb
Nom Fichier :

Langue d'enseignement:

Le document est chargé, s'il vous plaît patienter

Téléchargez votre Fermer

Le document est chargé, s'il vous plaît patienter

Téléchargez votre Fermer

24 AdonisC2_ENcopy122F_FM.book Page 25 Thursday, February 15, 2001 3:23 PM Copy Paper Direction-fixed paper or 2-sided paper The direction-fixed (top to bottom) or 2-sided paper (letterhead paper, punched paper, or copied paper, e.g.) might not be printed correctly depending on how the originals and paper are set in place. Set "Letterhead setting" of system settings and then set the original and paper as shown below. . “Letterhead Setting” in . P.233 “Input/Output” 1 25 AdonisC2_ENcopy122F_FM.book Page 26 Thursday, February 15, 2001 3:23 PM Basics Non-recommended Paper R CAUTION: 1 • Do not use aluminum foil, carbon paper, or similar conductive paper to avoid a fire or equipment failure. Important . Do not use any of the following kinds of paper or a fault might occur. • Thermal fax paper • Art paper • Aluminum foil • Carbon paper • Conductive paper • Colored OHP transparencies • Paper with perforated lines • Hemmed paper Note . Do not use the following kinds of paper or a misfeed might occur. • Bent, folded, or creased paper • Torn paper • Slippery paper • Perforated paper • Rough paper • Thin paper that has low stiffness • Paper with much paper dust on its surface . If you make a copy on rough grain paper, the copy image might be blurred. Paper Storage Note . When storing paper, the following precautions should always be followed: • Do not store paper where it will be exposed to direct sunlight. • Avoid storing paper in humid areas (humidity: 70% or less). • Store on a flat surface. . Keep open reams of papers in the package, and store as you would unopened paper. . Under high temperature and high humidity, or low temperature and low humidity conditions, store paper in a vinyl bag. 26 AdonisC2_ENcopy122F_FM.book Page 27 Thursday, February 15, 2001 3:23 PM Toner Toner Handling Toner 1 R WARNING: • Do not incinerate used toner or toner containers. Toner dust might ignite when exposed to an open flame. Dispose of used toner containers in accordance with local regulations for plastics. R CAUTION: • Keep toner (used or unused) and toner containers out of reach of children. R CAUTION: • Our products are engineered to meet high standards of quality and functionality, and we recommend that you only use the expendable supplies available at an authorized dealer. Important . If you use toner other than the recommended type, a fault might occur. Reference If you want to add toner. . P.183 “D Adding Toner” Toner Storage When storing toner, the following precautions should always be followed: • Store toner containers in a cool, dry place free from direct sunlight. • Store on a flat surface. Used Toner Note . Used toner cannot be re-used. 27 AdonisC2_ENcopy122F_FM.book Page 28 Thursday, February 15, 2001 3:23 PM Basics 1 28 292. Copying Basic Procedure AMake sure that the machine is in Copy mode. If the machine is not in Copy mode, press the {Copy} key. BWhen the machine is set for the user code, enter the user code with the number keys and then press the {{{{#}}}} key. Reference . P.68 “Other Functions”. CMake sure that there are no previ- ous settings remaining. Note .To clear settings, press the {Clear Modes} key. DSet your originals. Reference . P.31 “Setting Originals”. ESet your desired settings. FEnter the number of copies re- quired with the number keys. Note .The maximum copy quantity can be set between 1 and 999 (default: 999). .To change the number entered, press the {Clear/Stop} key and enter the new number. GPress the {{{{Start}}}} key. The machine starts copying. Note .When you set originals on the exposure glass, press the {#} k e y afte r all orig in als ar e scanned. .Copies are delivered face down. .To stop the machine during the multi-copy run, press the {Clear/ Stop} key. .To return the machine to the ini- tial condition after copying, press the {Clear Modes} key. AdonisC2_ENcopy122F_FM.book Page 29 Thursday, February 15, 2001 3:23 PM 2. Copying Basic Procedure AMake sure that the machine is in Copy mode. If the machine is not in Copy mode, press the {Copy} key. BWhen the machine is set for the user code, enter the user code with the number keys and then press the {{{{#}}}} key. Reference . P.68 “Other Functions”. CMake sure that there are no previ- ous settings remaining. Note .To clear settings, press the {Clear Modes} key. DSet your originals. Reference . P.31 “Setting Originals”. ESet your desired settings. FEnter the number of copies re- quired with the number keys. Note .The maximum copy quantity can be set between 1 and 999 (default: 999). .To change the number entered, press the {Clear/Stop} key and enter the new number. GPress the {{{{Start}}}} key. The machine starts copying. Note .When you set originals on the exposure glass, press the {#} k e y afte r all orig in als ar e scanned. .Copies are delivered face down. .To stop the machine during the multi-copy run, press the {Clear/ Stop} key. .To return the machine to the ini- tial condition after copying, press the {Clear Modes} key. AdonisC...